Abstract:Fillet welds by intermittent welding are widely used in the welding of centrifugal fans, such as attaching a fan blade to the rear plate. The intermittent welding method transforms the full-length continuous weld into multiple short welds to minimize distortion by reducing the total heat input for a welded joint to control welding distortion. An infinite number of short welds are created during this process. However, depending on the complexity of the model, the computational cost of predicting welding distortion based on full-scale modeling is considerable. These numerous short welds undoubtedly complicate modeling and computations, limiting rapid distortion prediction for large and complex structures. This study develops an equivalent deformation calculation approach based on a local-to-global technique and applies it to predict distortion of a fillet joint welded specimen. The approach consists of two steps. First, the welding-induced structural deformation is calculated for a two-dimensional (2D) weld and a 2D heat-affected zone (local calculation). Second, the 2D structural deformation is applied to the full-scale welded structure using a nearest-point spatial interpolation algorithm to acquire the three-dimensional (3D) equivalent deformation (global calculation). Note that the weld shape was considered in both local and global calculations. In addition, welding tests were performed, and the coordinates of the key points were measured. The geometric parameters of the welds used in the numerical simulations were obtained from experimental observations. Finally, the key point coordinates obtained by the proposed approach were compared with experimental measurements. Furthermore, the distribution of out-of-plane distortion caused by the new approach was compared with the simulation results of the thermo-elastic-plastic method performed on a full-scale welded structure. The proposed approach can be verified by both comparisons.

Welding Distortion Prediction In 5a06 Aluminum Alloy Complex Structure Via Inherent Strain Method

Study on the Prediction of Welding Distortion of Aluminium Alloy Based on Inherent Strain Method

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Prediction of Welding Distortions Based on Theory of Inherent Strain by FEM and Its Application

Numerical simulation on bucking distortion of aluminum alloy thin-plate weldment

Determination of Welding Stress and Distortion in Discontinuous Welding by Means of Numerical Simulation and Comparison with Experimental Measurements

Study on FEM Numerical Simulation Method for the Welding Distortion

Recent Research on Welding Distortion Prediction in Thin Plate Fabrication by Means of Elastic FE Computation

Evaluation Method for Inherent Deformation and its Application in Predicting Welding Distortion on Hull Blocks

Investigating Welding Distortion of Thin-Plate Stiffened Panel Steel Structures by Means of Thermal Elastic Plastic Finite Element Method

Prediction of deformation of large welding fabrication based on inherent strain

Welding-induced stresses and distortion in high-strength steel T-joints: Numerical and experimental study

Welding Distortion Prediction and Mitigation in Thick Steel Plate Structures on Ships

Finite Element Analysis of Residual Welding Stresses and Deformation for a 5A06 Aluminum Alloy Plate

Predicting Residual Distortion of Aluminum Alloy Stiffened Sheet after Friction Stir Welding by Numerical Simulation

Prediction of distortion in a thin-plate structure with intermittent fillet joints using a local-to-global approach

Research of Complicated Ship Structure Welding Distortion Based on ANSYS

Prediction of welding deformation of large complicated structure based on inherent strain methods

Prediction of welding distortion during assembly process of thin plate structures

Theoretical Prediction of Welding Distortion Considering Positioning And the Gap Between Parts

Accuracy of computational welding mechanics methods for estimation of angular distortion and residual stresses