Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. In this study, the alumina-based tungsten carbide (WC-Al2O3) composites reinforced by different weight percentages of carbon nanotubes were successfully prepared by the advanced spark plasma sintering technique. This study has the novelty that such composites with the given compositions were never sintered before using spark plasma sintering. The WC-Al2O3-CNTs composites were fabricated to design advanced tool materials with an optimum set of mechanical and thermal properties for high-temperature cutting applications. The experimental results revealed considerable growth in micro-hardness and fracture toughness in WC-Al2O3-CNTs composites as compared to WC-Al2O3 composites. The ideal set of mechanical properties was acquired by WC-Al2O3-CNTs-0.5 composite which also exhibited a minimum value of grain size. At higher concentrations of carbon nanotubes, the mechanical properties of composites tend to degrade due to the agglomeration of carbon nanotubes. The study presented better results in sintered composites than the composites fabricated through other sintering techniques. The improved strengthening and toughening results of WC-Al2O3-CNTs composites along with the fine microstructures were mainly acquired by inhibiting grain growth during sintering, improved dispersion of the constituents in the composites (electron probe microscopy analysis/wavelength dispersive spectroscopy mapping) and consolidation at shorter sintering periods in spark plasma sintering. A thermal study was also conducted to discuss the thermal stability of sintered composites at ambient as well as at higher temperatures to estimate the behavior of thermal conductivity and thermal diffusivity of composites at different temperatures.

Sintering Behaviors of Carbon NanotubesAluminum Composite Powders

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition

Study on the Properties of Carbon Nanotube (CNTs) Reinforced AlSi10Mg Composites Fabricated by Powder Metallurgy

Enhancement of Electrical Conductivity of Aluminum-Based Nanocomposite Produced by Spark Plasma Sintering

Smart Mechanical Powder Processing for Producing Carbon Nanotube Reinforced Aluminum Matrix Composites

Effects of the addition of CNTs and Al alloying on the microstructure and properties of Cu-(Al)/CNTs composites

Balanced strength and ductility in CNT/Al composites achieved by flake powder metallurgy via shift-speed ball milling

Improving the mechanical properties of carbon nanotubes reinforced pure aluminum matrix composites by achieving non-equilibrium interface

Experimental investigation on fabrication, characterization and properties of spark plasma sintered alumina-based tungsten carbide composites reinforced by carbon nanotubes

Printability enhancement and mechanical property improvement via in situ synthesis of carbon nanotubes on aluminium powder

Effect of Carbon Nanotubes as Reinforcement on the Mechanical Properties of Aluminum-Copper-Magnesium Alloy

Spark Plasma Sintering of Aluminum Nanocomposite Powders: Recent Strategy to Translate from Lab-Scale to Mass Production

Micro/Nanostructure and Tribological Characteristics of Pressureless Sintered Carbon Nanotubes Reinforced Aluminium Matrix Composites

Effect of powder microstructure on the thermal and mechanical properties of hot extruded Al-CNT composite

Architectural and component design of CNTs/Al hierarchical composite for enhanced mechanical/thermal properties

The Effect of CNTs on the Spark Plasma Sintering Densification Behavior and Mechanical Properties of B4C-Si Powders

Heterocoagulation System Assisted Adsorption of Carbon Nanotubes on Alumina for Toughening Ceramics

Influence of CNTs on the Sintering Behavior and Mechanical Properties of Boron Carbide by SPS Process

Carbon Nanotubes: Intragranular Dispersion of Carbon Nanotubes Comprehensively Improves Aluminum Alloys (adv. Sci. 7/2018)

Effect of spark plasma sintering temperature on the multi-scale microstructure evolution and mechanical properties of Ti 2 AlC/TiAl composites with network architecture