Abstract:At present, it is recognized that nanoparticles can improve the printability of many metals in fusion additive manufacturing, obtain finer microstructures and higher mechanical properties. However, it is unclear how nanoparticles affect the printing process and the extent of the effect. Numerical simulation can realize such a quantitative study. Here, we developed a method to quantify the effects of nano-particles on the printability in laser powder bed fusion with multiple physics simulation model, with the consideration of surface tension, Marangoni effect, phase transition and recoil force via volume of fluid method. The influence of nanoparticles as well as thermal properties on the molten pool morphology, temperature distribution and cooling rate were studied. The results showed that TiB2/AlSi10Mg possessed higher cooling rate and larger melt pool depth, which is consistent with single track experimental result. The G-R solidification map indicated that for the specific points in the mush zone, percentages of them in equiaxed, mixed and columnar region for TiB2/ AlSi10Mg are 14.29%, 76.19% and 9.52%, respectively, revealing that TiB2 can lead to the transition from the columnar region to the equiaxed one, which was also confirmed by the experimental EBSD map. The study on thermophysical properties indicated that thermal conductivity had the largest influence on the characteristic of molten pool, which can be used as a strategy to optimize the quality in practical application. By introducing the printability factor F, we determined that the printability of AlSi10Mg and different particles decorated AlSi10Mg is in the following order: TiB2/AlSi10Mg > TiC/AlSi10Mg > SiC/AlSi10Mg > AlSi10Mg. This work provides a theoretical framework to predict the printability and efficiently screen for promising metal materials with good printability.

Printability enhancement and mechanical property improvement via in situ synthesis of carbon nanotubes on aluminium powder

A comprehensive model to quantify the effects of additional nano-particles on the printability in laser powder bed fusion of aluminum alloy and composite

Powder preparation during ball milling and laser additive manufacturing of aluminum matrix nanocomposites: Powder properties, processability and mechanical property

Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders

Mechanical behavior and microstructure of 3D-printed carbon nanotubes-reinforced Cu composite

Study on the Properties of Carbon Nanotube (CNTs) Reinforced AlSi10Mg Composites Fabricated by Powder Metallurgy

Smart Mechanical Powder Processing for Producing Carbon Nanotube Reinforced Aluminum Matrix Composites

Improving the Thermal and Mechanical Properties of an Alumina-Filled Silicone Rubber Composite by Incorporating Carbon Nanotubes

Improving the mechanical properties of carbon nanotubes reinforced pure aluminum matrix composites by achieving non-equilibrium interface

Evolution of Microstructure and Mechanical Properties of CNTs/Al-Mg Composites Prepared by Powder Metallurgy

The role of in-situ nano-TiB2 particles in improving the printability of noncastable 2024Al alloy

Improvement of interfacial interaction and mechanical properties in aluminum matrix composites reinforced with Cu-coated carbon nanotubes

Carbon Nanotubes Enabled Laser 3D Printing of High-Performance Titanium with Highly Concentrated Reinforcement

Effect of Carbon Nanotubes as Reinforcement on the Mechanical Properties of Aluminum-Copper-Magnesium Alloy

Al/CNT nanocomposite fabrication on the different property of raw material using a planetary ball mill

Advancements in Laser Powder Bed Fusion of Carbon Nanotubes-Reinforced AlSi10Mg Alloy: A Comprehensive Analysis of Microstructure Evolution, Properties, and Future Prospects

Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition

Effectively enhanced strength by interfacial reactions in in-situ carbon reinforced Al matrix composites

Effects of the addition of CNTs and Al alloying on the microstructure and properties of Cu-(Al)/CNTs composites

In Situ Filler Addition for Homogeneous Dispersion of Carbon Nanotubes in Multi Jet Fusion–Printed Elastomer Composites

Fabrication and Tribological Properties of Carbon Nanotubes-Aluminum Composites