Abstract:This study aims to enhance the amorphous formation ability and magnetic properties that are crucial for the production of high-quality nanocrystalline alloys. The structural, thermal, and magnetic characteristics of the alloy ribbons were analyzed through a systematic adjustment of Nb content, and, including Nb, significantly improved the amorphous formation ability and thermal stability of the alloy, which is vital for nanocrystalline production. By varying the Nb content within Fe85-xSi2B8P4Cu1Nbx (x = 0.0, 0.5, 1.0, and 1.5), we explored finer adjustments to achieve homogeneous amorphousness during the melt spinning process. Careful control over the Nb content facilitated the production of amorphous ribbons with consistent homogeneity, which was critical for the subsequent fabrication of nanocrystalline structures through heat treatment. As a result, the amorphous ribbon of Fe85.5Si2B8P4Cu1Nb0.5 showed a low coercivity of 7 A/m. The heat treatment showed a remarkably high saturation magnetic flux density of 1.94 T. Additionally, the grain size (D) decreased as the Nb content increased, with D values ranging from 25.09 nm to 24.29 nm, as calculated by the Scherrer formula. Mössbauer spectroscopy confirmed the formation of nanocrystalline and residual amorphous phases. The hyperfine magnetic field values (Beff) decreased from 25.7 T to 24.7 T in the amorphous samples and reached 33.0 T in the nanocrystalline phases. This study highlights Nb's positive impact on thermal stability and amorphous formation capacity in Fe-Si-B-P-Cu alloys, culminating in the successful fabrication of nanocrystalline ribbons with superior structural and magnetic properties.

Fesibpnbcu Bulk Nanocrystalline Alloys With High Gfa And Excellent Soft-Magnetic Properties

High-temperature Magnetic Properties of Fe-based Nanocrystalline Alloy

Improving the glass formation ability and magnetic properties by Nb in Fe-Si-B-P-Cu-Nb nanocrystalline alloys

Effect of Nb Addition on the Glass-Forming Ability, Soft-Magnetic Properties and Mechanical Properties of CoFeNiBSiNb Bulk Glassy Alloys

Excellent Soft Magnetic Properties and Enhanced Glass Forming Ability of Fe-Si-B-C-Cu Nanocrystalline Alloys

Effects of Nb Addition and Heat Treatment on the Crystallization Behavior, Thermal Stability and Soft Magnetic Properties of FeSiBPCuC Alloys

Effects of boron content on the structure and magnetic properties of Fe81-xSi13BxMo2Cr1Cu1P2 nanocrystalline alloys

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

PREPARATION AND PROPERTIES OF BULK AMORPHOUS Fe-Ni-P-B-Ga ALLOYS

Effects of Si addition on crystallization process and soft magnetic properties of high-Fe and high-Cu-content Fe-Si-B-P-Cu nanocrystalline alloys

Effect of Ni Substitution for Si Element on Thermal and Soft Magnetic Properties of Fe73.5NixSi15.5-xB7Nb3Cu1 Nanocrystalline Alloys

Effect of Nb addition on the magnetic properties and microstructure of FePCCu nanocrystalline alloy

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

Optimization of Crystallization Behavior and Soft Magnetic Properties of the Si-free Fe-B-P-C-Cu Nanocrystalline Alloys by Cu Content Tuning

Structural, Magnetic, and Mössbauer Study on Nb and Heat Treatment of Fe-Si-B-P-Cu-Nb Ribbons

Effects of Mn addition on crystallization behavior and soft magnetic properties of Fe–Si–B–P–Cu nanocrystalline alloy

Fabrication and Soft Magnetic Properties of Fe–B–Si–Zr/Hf–Cu Nanocrystalline Alloys with High Glass-Forming Ability

Roles of Cu in Fe-based Soft Magnetic Nanocrystalline Alloys with High Fe Content

Magnetic and structural behaviours of nanocrystalline Fe 70.8 Nb 3.7 Cu 1 Al 2.7 Mn 0.7 Si 13.5 B 7.6 alloy

Effect of Si/B ratio on glass-forming ability, phase transitions and magnetic properties in (Fe40Ni40SixByCu1)0.97Nb0.03 alloys

High performance Fe-based nanocrystalline alloys with excellent thermal stability