Abstract:While the microstructure at the grain boundary of hot-deformed nanocrystalline Nd-Fe-B magnets is intensively studied, limited works have been devoted to the deformation behavior of the Nd2Fe14B matrix grain, especially for micrometer scale grains and at high temperatures. In this study, the plastic deformation behavior of the Nd2Fe14B matrix grains was studied by uniaxial compression from 1050 degrees C to 1120 degrees C using both anisotropic and isotropic sintered Nd-Fe-B magnets. The anisotropic magnets were orientated with the c-axis 0 degrees , 45 degrees and 90 degrees to the loading axis. According to the Arrhenius-type power law relationship, the stress exponent n increased from 1.5 to 2.7 when the c-axis changed from 0 degrees to 90 degrees to the loading direction and the corresponding apparent activation energies Q increased from 384 to 437 kJ/mol. Although the observed n > 1 coincides with the interface-reaction controlled solution-precipitation creep mechanism, the determined Q is much larger than those reported in the nanocrystalline magnet. Our study conferred the first demonstration of short straight dislocations array on the (001) plane in the 45 degrees-orientated anisotropic specimen after 10% height reduction. Grain elongation and local misorientation inside the grain were most obvious in the 45 degrees-oriented specimen after compression. The extent of the local misorientation agreed well with the spacing corresponding to geometrically necessary dislocation. The results reveal that grain rotation via grain boundary sliding and dislocation-mediated deformation were operable depending on the loading direction when the micro-sized magnets were deformed above 1000 degrees C.

Fracture Behavior of Sintered NdFeB Magnets During Cooling from Sintering Temperature

Influence of Hot-Pressing on Sintered Nd-Fe-B Permanent Magnets

On the Cooling Rate of Strip Cast Ingots for Sintered NdFeB Magnets

Effect of incoherent phase boundary on fracture mechanism of sintered Nd-Fe-B alloy

Effect of Sintering Process on the Magnetic and Mechanical Properties of Sintered Nd–Fe–B Magnets

Orientation Dependence of Plastic Deformation of Sintered Nd-Fe-B Magnets at High Temperature

Anisotropic fracture behavior of sintered rare-earth permanent magnets

The Fracture Toughness of Sintered NdFeB Permanent Magnet

Obvious Difference in Fracture Strength and Magnetic Properties by Strip Casting Thickness of NdFeB

Mechanical properties and microstructure of Nd-Fe-B magnet diffused by low melting point alloys

Temperature-dependent microstructure and magnetic properties evolution in the sintered Nd-Fe-B magnets with Pr-Al-Cu diffusion

Experimental and theoretical model study on the dynamic mechanical behavior of sintered NdFeB

Investigation of Domain Wall Pinning Effect Induced by Annealing Stress in Sintered Nd–Fe–B Magnet

On the Effect of Cooling Parameters on Solidification Structure in NdFeB Alloys

Grain Boundary Microstructure in DyF3-diffusion Processed Nd–Fe–B Sintered Magnets

Microstructure and Phase Evolution Mechanism in Hot-pressed and Hot-deformed Nd-Fe-B Magnets with Nd<sub>85</sub>Cu<sub>15</sub> Addition

An investigation of the microstructure in the grain boundary region of Nd-Fe-B sintered magnet during post-sintering annealing

Microstructure and Phase Evolution Mechanism in Hot-pressed and Hot-deformed Nd-Fe-B Magnets with Nd85Cu15 Addition

Diffusion of Nd-Rich Phase in the Spark Plasma Sintered and Hot Deformed Nanocrystalline Ndfeb Magnets

Microstructure Improvement Related Coercivity Enhancement for Sintered NdFeB Magnets after Optimized Additional Heat Treatment

Micromagnetic Simulation of Anisotropic Grain Boundary Diffusion for Sintered Nd-Fe-B Magnets