Abstract:Grain boundary diffusion technology is pivotal in the preparation of high-performance NdFeB magnets. This study investigates the factors that affect the efficiency of grain boundary diffusion, starting from the properties of the diffusion matrix. Through the adjustment of the sintering process, we effectively prepared magnets with varied densities that serve as the matrix for grain boundary diffusion with TbH x diffusion. The mobility characteristics of the Nd-rich phase during the densification stage are leveraged to ensure a more extensive distribution of heavy rare earth elements within the magnets. According to the experimental results, the increase in coercivity of low-density magnets after diffusion is significantly greater than that of relatively high-density magnets. The coercivity values measured are 805.32 kA/m for low-density magnets and 470.3 kA/m for high-density magnets. Additionally, grain boundary diffusion notably enhances the density of initial low-density magnets, addressing the issue of low density during the sintering stage. Before the diffusion treatment, the Nd-rich phases primarily concentrate at the triangular grain boundaries, resulting in an increased number of cavity defects in the magnets. These cavity defects contain atoms in a higher energy state, making them more prone to transition. Consequently, the diffusion activation energy at the void defects is lower than the intracrystalline diffusion activation energy, accelerating atom diffusion. The presence of larger cavities also provides more space for atom migration, thereby promoting the diffusion process. After the diffusion treatment, the proportion of bulk Nd-rich phases significantly decreases, and they infiltrate between the grains to fill the cavity defects, forming continuous fine grain boundaries. Based on these observations, the study aims to explore how to utilize this information to develop an efficient technique for grain boundary diffusion. Graphical abstract Magnets with different densities underwent grain boundary diffusion through modified sintering. The results show that low-density magnets experience a significantly larger increase in coercivity (805.32 kA/m) compared to high-density magnets (407.3 kA/m) after diffusion. Microstructural analysis reveals that the Nd-rich phase concentrates at triangular grain boundaries in low-density magnets before diffusion, resulting in more cavity defects. However, after diffusion, the proportion of large Nd-rich phases decreases, filling the cavities and forming continuous grain boundaries, significantly increasing magnet density. Atoms at cavity defects have higher energy and mobility, leading to lower activation energy for diffusion and promoting the process. Download : Download high-res image (453KB) Download : Download full-size image

Effect of Grain Boundary Diffusion Pr and Cu on Properties of Sintered Nd-Fe-B Permanent Magnet

The effect of PrCuGa grain boundary diffusion on the magnetic properties and microstructure of sintered Nd-La-Y-Fe-B magnet

Effect of PrFe alloy grain boundary diffusion on coercivity and microstructure of sintered Nd-Fe-B magnets

Coercivity enhancement of waste Nd-Fe-B magnets by Pr70Cu30 grain boundary diffusion process

Mechanical properties and microstructure of Nd-Fe-B magnet diffused by low melting point alloys

Temperature-dependent microstructure and magnetic properties evolution in the sintered Nd-Fe-B magnets with Pr-Al-Cu diffusion

Comparison of (pr, Nd)H Grain Boundary Restructuring and Diffusion on the Magnetic Properties of Nd–La–Ce–Fe–B Sintered Magnet

Microstructure and Improved Properties of Sintered Nd-Fe-B Magnets by Grain Boundary Diffusion of Non-Rare Earth

Effect of Different Grain Boundary Diffusion Alloys on Magnetic Properties of Dy-free Sintered NdFeB Magnet

Coercivity and Corrosion Resistance Enhancement of Multi-Main-phase Nd-Ce-Fe-B Sintered Magnets by the Grain Boundary Diffusion Process Using Pr81.5Ga19.5 and Pr81.5Ga14.5Cu5 Alloys

Magnetic performance change of multi-main-phase Nd–Ce–Fe–B magnets by diffusing (Nd, Pr)H x

Grain boundary diffusion efficiency of sintered Nd-Fe-B magnets by Al, Sn and Zn addition

Significantly Enhancing the Coercivity of NdFeB Magnets by Ternary Pr-Al-Cu Alloys Diffusion and Understanding the Elements Diffusion Behavior

Effective microstructure optimization and coercivity enhancement of sintered Nd–Fe–B magnet by grain boundary diffusion of Pr60Tb13Al27 alloy

Grain Boundary Diffusion Treatment of Sintered NdFeB Magnets by Low Cost La-Al-Cu Alloys with Various Al/Cu Ratios

Effects of pressure on NdCu grain boundary diffusion of Nd-Fe-B sintered magnets

Clarifying the Dominated Coercivity Enhancement Mechanism of Grain Boundary Diffused Nd-Fe-B Magnets by Pr-based Alloys

Effect of Ce content on the magnetic properties and microstructure of sintered Nd-Ce-Fe-B magnets after Pr 70 Cu 30 alloy diffusion

Utility and influence mechanism of densification modulation on grain boundary diffusion in NdFeB magnets

Experimental and Calculational Analysis about the Influence of the Grain Boundary Diffusion Depth on the Magnetic Properties of a Sintered Nd-Fe-B Magnet

Magnetic performance and microstructure of NdFeB sintered magnet by diffusing Tb10Pr90-(Cu,Al,Ga) alloys