Abstract:Amorphous nickel-phosphorus alloy as a metallic glass layer can not only protect the substrate from mechanical stress and corrosion but also improve the optical performance. The morphology, structure and chemical composition were studied in the work by using x-ray diffraction (XRD), high resolution transmission electron microscope, scanning electron microscope and in situ energy-dispersive x-ray spectroscopy. Non-isothermal crystallization kinetics in amorphous electroless nickel-phosphorus alloy plating was characterized by differential scanning calorimetry (DSC). The mass percentage concentration of P in the coating surface was about 12.36mass%, which belongs to high phosphorus metal glass coating. All the overall DSC curves with various heating rates have just one single exothermic peak of crystallization. The apparent activation energy E of characteristic temperatures were calculated by using Kissinger and Ozawa approach. Additionally, the local activation energy E ( x ) was measured by Kissinger–Akahira–Sunose and Ozawa-Flynn-Wall methods demonstrates a progressive declining trend as the crystallization process proceeds, which indicated the crystallization process becomes easier with the increase in temperature. Local activation energy E ( x ) decreased as the crystal volume fraction ( x ) increased in the crystallization process. The local Avrami exponents n ( x ) was estimated by the Johnson–Mehl–Avrami equation, and the values exceed 2.5 at different heating rates, which reflected the crystallization process is a representative three-dimensional diffusion-controlled growth mechanism in the overall crystallization process, and the nucleation rate increased with the increase in the crystallized volume fraction ( x ). Final results will provide comprehensive insights into the understanding about Ni–P plating formation.

Crystallization and Electrochemical Corrosion Behaviors of Nanometer Amorphous Ni-P Alloys

Short Communication: the Corrosion Behaviors of Amorphous, Nanocrystalline and Crystalline Ni-W Alloys Coating

Microstructure and Crystallization Process of Electrodeposited Amorphous Ni-P Coatings

Electrochemical Synthesis and Characterization of Ni–P Alloy Coatings from Eutectic–Based Ionic Liquid

Corrosion resistance of electrolessly deposited Ni–P and Ni–W–P alloys with various structures

Structure and Anti-Corrosion of Tri-Layer Ni-P Amorphous Alloy Coating Prepared in the Same Bath

Study On The Crystallization Process Of Ni-P Amorphous Alloy

Non-isothermal crystallization kinetics of amorphous electroless nickel-phosphorus alloy plating

Corrosion and mechanical behavior of amorphous-nanocrystalline NiCrMo coatings

Crystallization Behavior of Nanometer-Sized Al2o3 Composite Coatings Prepared by Electroless Deposition

Corrosion Resistance and Electrochemical Behaviour of Amorphous Ni84.9Cr7.4Si4.2Fe3.5 Alloy in Alkaline and Acidic Solutions

Crystallization Behavior and Electrochemical Corrosion Characteristics of Amorphous Ni-Fe-W-B Alloy

Optimization of the Electroplating Process for Amorphous Nickel- Phosphorus Alloy

The Structure and Properties of Electroless Ni–Mo–Cr–P Coatings on Copper Alloy

Wear and Corrosion Properties of Crystalline Ni-W Alloy Coatings Prepared by Electrodeposition

Effects of annealing temperature on the crystal structure and properties of electroless deposited Ni–W–Cr–P alloy coatings

Preparation of Amorphous Nickel-Phosphorus Alloy Coating by Electroplating

Preparation of Amorphous-Nanocrystalline Composite Structured Ni–P Electrodeposits

A study on the formation conditions of amorphous nickel-phosphorus (Ni-P) alloy by laser-assisted electrodeposition

Electrochemical corrosion behavior of amorphous Ni42.2W19.2Fe18.9B19.7 alloy

Ni-P coatings electroplating - A review, Part I: Pure Ni-P alloy