Abstract:The microstructural evolution of in-situ TiB2 nano-particle reinforced AlZnMgCu composites during hot extrusion was investigated from micro to macro scales by a combination of various techniques, including neutron and synchrotron X-ray diffraction, optical microscopy, scanning and transmission electron microscopy and electron backscatter diffraction (EBSD). The development of microstructure has shown a bimodal grain structure with distinctive spatial distributions of TiB2 particles: the elongated coarse grain structure with smaller dispersed particles and the fine grains mixed with clusters of relatively larger particles. The particle stimulated nucleation occurs at large particle clusters, resulting in recystallized (sub)micron sized fine grains. The dispersed smaller particles are observed to promote dislocation generation and to prohibit recovery. They are shown to reduce the misorientation of low angle grain boundaries due to the pinning effects on independent dislocations, which also lead to the suppression of dynamic recovery and increase of driving force for dynamic recrystallization. Quantitative texture analysis combined with neutron diffraction and EBSD has exhibited the development of a strong 〈111〉 and 〈001〉 dual fiber texture, and both texture volume fractions are changing with the particle content. In addition, the synchrotron diffraction experiments have shown that dislocation density increases with the particle content in both texture components. The microstructure evolution is the result from a complex process of particles/matrix interaction during the deformation and dynamic recrystallization. In comparison with its particle-free alloy counterpart, the thermomechanical response of the composites at high temperature is discussed in terms of aluminum deformation and recrystallization mechanisms combined with nanosized particle effects.

Study of the Influence of Tib2 Particles on the Melt Structure of the Hypoeutectic Al-Cu Alloy by Small Angle X-Ray Scattering

Effect of TiB2 addition on microstructure and fluidity of cast TiAl alloy

Influence of TiB_2 Particles on the Thermal Stability of Cu_(47)Zr_(40)Al_(13) Bulk Amorphous Alloy Composites

Effect of Cu element on morphology of TiB 2 particles in TiB 2 /Al?Cu composites

Atomic tuning effect of TiB2 particles on the liquid phase separation behavior of an Al-Bi immiscible alloy

Promoting Strengthening and Grain Refinement of Aluminum Alloy During Wire and Arc Additive Manufacturing by Adding TiB2 Particles

Influence of Ti Elements on the Evolution of Microstructure, Mechanical Properties and Thermal Stability of Al-Cu Alloy

Synergistic Effect of in Situ TiB2 Particle and Ti Solute on Fluidity and Hot Tearing Susceptibility of Al–Li–Cu–X Alloy

In situ TiB2 particulate reinforced near eutectic Al–Si alloy composites

Enhanced combination of strength and ductility in the semi-solid rheocast hypereutectic Al Si alloy with the effect of in-situ TiB2 particles

Insight into the recrystallization behavior and precipitation reaction of in-situ nano TiB2/Al Cu Mg composite during heat treatment

Insight into the recrystallization behavior and precipitation reaction of in-situ nano TiB2/AlCuMg composite during heat treatment

Effects of TiB 2 particles on artificial aging response of high-Li-content TiB 2 /Al-Li-Cu composite

Ceo2 Induced Dispersive Distribution of Tib2 Particles in in Situ Tib2/Al Composite

Quantitative Study of Particle Size Distribution in an In-Situ Grown Al–TiB2 Composite by Synchrotron X-ray Diffraction and Electron Microscopy

Microstructure and mechanical properties of Al-Cu alloy during wire and arc additive manufacturing by adding micron TiB2 particles

Effect of TiB2 particles on thermal deformation behavior and mechanical properties of aluminum alloy

Multi-scale Study of Microstructure Evolution in Hot Extruded Nano-Sized TiB2 Particle Reinforced Aluminum Composites

The Effect of V on the Morphology of TiB2 Particles in As-Cast Aluminum Composites

Coupling Effects of Hafnium and Boron Additions on Solidification Structure Evolution in Ti46Al Alloy

Microstructure characterization, mechanical properties and toughening mechanism of TiB 2 -containing conventional cast TiAl-based alloy