Abstract:Immiscible alloy, as a kind of special metallurgy characteristic alloy, has been investigated for decades. The fabrication of immiscible alloy with a homogeneous microstructure remains a challenge due to the liquid-liquid phase separation. The microstructure and the properties of Al-Bi immiscible alloy with an addition of Ti are investigated, and the effect of adding Ti on mechanical behavior for self-lubricating performance is measured. The pure Al and Ti are first melted in graphite crucible under argon gas protection. An appropriate amount of Bi is added into the melt. After melting and homogenizing the immiscible alloy, the melt is maintained at 1150 ℃ for 10 min, and then it is quenched. The scanning electron microscope analysis results show that the addition of Ti leads to a significant reduction of Bi-rich droplet size and an increase of particle number. The Bi-rich droplets of the ternary Al-Bi-Ti alloy are more homogeneously distributed throughout the Al matrix than the microstructure of binary Al-Bi alloy. The results from X-ray diffraction and energy disspersive spectrometer indicate that Al3Ti compounds, which are the transformation products between Al and Ti elements, disperse in the Al matrix. The needle-like Al3Ti compounds suspend in Al-Bi melt and impede the Bi phase in the liquid miscibility gap from being segregated. This is conducible to refining the microstructure of Al-Bi alloy. The Al3Ti compounds form before the initial nucleation of the Bi phase in the Al matrix, and impede the Bi phase from being segregated. Al-Bi immiscible alloy is effectively fabricated with dispersed fine second phase droplets by the addition of Ti. For the Al-Bi alloy, the coarse and non-uniform distribution of Bi-rich droplets can be easily broken. The improvement in the wear resistance of Al-Bi immiscible alloy by adding Ti can be attributed not only to the dispersion and size of the Bi soft phase but also to the in-situ formation of Al3Ti compounds. The addition of Ti is effective for refining the microstructure and improving the wear properties, which simultaneously improves the practical applications of self-lubrication bearing material with low coefficient of friction i.e., reducing the energy loss.

Atomic tuning effect of TiB2 particles on the liquid phase separation behavior of an Al-Bi immiscible alloy

High-efficiency Control of Phase Separation in Al-based Immiscible Alloys by TiC Particles

Effect of TiB 2 on the second Bi-rich phase in immiscible Al-Bi alloy

Multiple Ultrasounds Assisted Phase Separation and Monotectic Solidification of Liquid Ternary Al81.5Cu14.7Bi3.8 Immiscible Alloy

A Computational and Experimental Study of Ultrasonicated Phase Separation Process for Liquid Al–Bi Immiscible Alloy

Effects of Adding Ti on Microstructure and Properties of Al-Bi Immiscible Alloy

Liquid phase separation and monotectic structure evolution of ternary Al62.6Sn28.5Cu8.9 immiscible alloy within ultrasonic field

Influence of Dispersed Solid Particles on the Liquid-Liquid Separation Process of Al-Bi Alloys

In Situsynchrotron Study of Liquid Phase Separation Process in Al-10 Wt.% Bi Immiscible Alloys by Radiography and Small Angle X-ray Scattering

Dynamic Behaviors of Minor Droplets and the Role of Bubbles in Phase-Separating AlBi Immiscible Alloy

Dynamic behaviors of minor droplets and the role of bubbles in phase-separating Al Bi immiscible alloy

Ab initio molecular dynamics study on the local structures and solid/liquid interface in liquid Al-Ti and Al-B-Ti alloys

Observation of Bi Coarsening and Dissolution Behaviors in Melting Al–Bi Immiscible Alloy

Ultrasonic Modulation of Phase Separation and Corrosion Resistance for Ternary Cu-Sn-Bi Immiscible Alloy.

Tunning the L-L Phase Separation of Al-Bi-TiB 2 Multiphase Composites Through Heterogeneous Nucleation and Ultrasound Cavitation

Effect of B and Ti on the Directionally Solidified Microstructure of the Nb–Si Alloys

Ultrasonic Cavitation and Acoustic Streaming Effects During Liquid Phase Separation and Dynamic Solidification of Ternary Al–Sn–Si Immiscible Alloy

Liquid–liquid Phase Equilibrium and Core–shell Structure Formation in Immiscible Al–Bi–Sn Alloys

Processing, Multiscale Microstructure Refinement and Mechanical Property Enhancement of Hypoeutectic Al–Si Alloys Via in Situ Bimodal-Sized TiB2 Particles

Atomic insights into heterogeneous nucleation and growth kinetics of Al on TiB<sub>2</sub> particles in undercooled Al-5Ti-1B melt

Effects of Ti Addition on the Liquid-Phase Separation of Cu 71 Cr 29 Alloy During Rapid Cooling