Abstract:To explore an innovative approach to prepare high-performance Mo-based refractory alloys, the rapid solidification mechanisms of undercooled Mo-40%Co hyperperitectic alloy were investigated by both electromagnetic levitation (EML) and drop tube (DT) techniques. During EML experiments, typical peritectic solidification still prevailed even at the maximum undercooling of 252 K (0.14 T-T). The dendrite growth velocity of primary sigma-Mo3Co2 compound varied with alloy undercooling by a power relation, which attained 24.3 mm s(-1). As the bulk undercooling increased, the conspicuous dendrite fragmentation of primary phase took place, resulting in its grain refinement and volume fraction reduction. Meanwhile, the second recalescence degree exhibited a decreasing tendency, which indicated that the peritectic reaction was remarkably suppressed in the undercooled state. Under free fall condition, two critical diameters were determined for tiny alloy droplets and the corresponding undercooling thresholds were calculated as 361 and 443 K, respectively. When the alloy droplet was larger than 707 mu m, the typical peritectic solidification proceeded and the final microstructure was composed of primary sigma-Mo3Co2 dendrites and interdendritic epsilon-Mo6Co7 peritectic phase. With the reduction of droplet diameter, the direct nucleation of peritectic phase was induced. In this case, the epsilon-Mo6Co7 intermetallic compound regions appeared preferentially at the periphery of alloy droplets, whereas the typical peritectic microstructure filled in the center area. Once the droplet diameter decreased to 93 mu m, the peritectic solidification characteristics disappeared completely and the metastable epsilon-Mo6Co7 single phase became the unique growth morphology.

Solidification Characterization of a New Rapidly Solidified Ni–Cr–Co Based Superalloy

Microstructural Characterization and Phase Separation Sequences During Solidification of Ni3Al-Based Superalloy

Microstructural Feature and Evolution of Rapidly Solidified Ni 3 Al-Based Superalloys

Rapid Growth Kinetics and Microstructure Modulation of Intermetallic Compounds Within Containerlessly Solidifying Mo-Co Refractory Alloys

Effect of Microstructure Evolution on Micro/Nano‐Mechanical Property of Fe–Co–Ni Ternary Alloys Solidified under Microgravity Condition

Solidification Characteristics and As-Cast Microstructures of a Ru-containing Nickel-Based Single Crystal Superalloy

Microstructure Formation Mechanism of Rapidly Solidified Ternary Co-Cu-Pb Monotectic Alloys

Research Development of Solidification Characteristics of a Mo-rich Ni3Al Based Single Crystal Superalloy

Effect of Melt Superheat Treatment on Solidification Behavior and Microstructure of New Ni–Co Based Superalloy

Solidification Characteristics and Segregation Behavior of a Ni-Fe-Cr Based Alloy

Solidification and Segregation Characteristics of Ni-Based Superalloy C700r-1 for Ultra-Supercritical Steam Turbine Rotor

Solidification Behavior of Ni-based Superalloy at Different Cooling Rates

Characterization of á precipitate and /á interface in polycrystalline Ni<sub>3</sub>Al-based superalloys

Rapid Solidification of Cu60Co30Cr10 Alloy under Different Conditions

Investigation of Solidification Behavior in a New High Alloy Ni-Based Superalloy

Effects of Cobalt on Solidification Characteristics and As-Cast Microstructure of an Advanced Nickel-Based Single Crystal Superalloys

Effect of Ni on the Solid Microstructure and Phase Transformation of the Rapid Solidification Cu75Cr25 Alloy

Characterization of the Microstructure Evolution and Microsegregation in A Ni-Based Superalloy under Super-High Thermal Gradient Directional Solidification

Microstructure Evolution and Elevated Temperature Compressive Properties of a Rapidly Solidified NiAl–Cr(Nb)/Dy Alloy

Microstructural Investigations of Ni-Based Superalloys by Directional Solidification Quenching Technique

Facile Formation of a Superalloy-Like Microstructure in Ni77Ga23 Alloys by Rapid Solidification Processing