Abstract:When using a femtosecond laser to machine a single-crystal silicon wafer, it is accompanied with a diffraction spot of plasma. The existing literature reports that the brightness of the image of plasma can be used as an indicator to online measure the depth of the machined groove on a micrometer scale. Because the plasma spot is influenced by eruption and partial occlusion of ablated material, this method, which simply relies on the spot image brightness as a feedback parameter, is not reliable or accurate. The pixel area, perimeter, and brightness characteristics of the plasma spot image need to be comprehensively analyzed to provide a reliable and accurate feedback to establish close-loop micromachining technology. Therefore, we first analyze the chirped amplification principle of generating a femtosecond laser and the application of the diffraction spot of plasma during the micromachining processing using the femtosecond laser. Second, we experiment using femtosecond laser ablation with a piece of 10 x 10 mm and thickness of 650 +/- 10 mu m single-crystal silicon wafer to obtain the corresponding relational data among parameters of laser processing power, processing speed, and laser spot image of plasma. Third, aiming at the characteristic of dim target of the laser spot image, the two-dimensional Otsu (maximum class square error method) is used to segment the laser spot image to improve the segmentation accuracy of the laser spot image. Finally, we analyze the relationship among area, perimeter of the laser spot image, and laser energy; the relationship among area, perimeter of the laser spot image, and the machined depth of groove; the relationship between brightness of the laser spot image and laser output power; and the relationship between brightness of laser spot image and machining speed. (C) 2017 Society of Photo-Optical Instrumentation Engineers (SPIE).

The Acoustic Characteristic Investigation of Micro Plasma Shock Wave Obtained by Femtosecond Laser Ablation of Silicon Wafer Surface

A Novel Acoustic Diagnostic Method on Femtosecond Laser Plasma Shock Wave

Plasma Acoustic Wave Diagnostics in Laser Shock Processing

Dynamics and its modulation of laser-induced plasma and shockwave in femtosecond double-pulse ablation of silicon

Shock Induced Phenomena In High Fluence Femtosecond Laser Ablation Of Silica Glass

Structure-Mediated Excitation of Air Plasma and Silicon Plasma Expansion in Femtosecond Laser Pulses Ablation

Enhancing the Expansion of a Plasma Shockwave by Crater-Induced Laser Refocusing in Femtosecond Laser Ablation of Fused Silica

Ultrafast Dynamics of Femtosecond Laser Irradiation of Silicon with Different Fluence

Comparison of Femtosecond Laser Ablation of Aluminum in Water and in Air by Time-Resolved Optical Diagnosis

Ultra-fast Diagnosis of Shock Waves and Plasma at Front and Rear Surfaces in the Bulk of Fused Silica Induced by an Nd:YAG Pulse Laser

Femtosecond Laser Ablation of Silicon in Air and Vacuum

Effects of Parameters in Femtosecond Laser Micromachining on Ablation of Silicon

Femtosecond-Laser-Ablation Dynamics in Silicon Revealed by Transient Reflectivity Change

Acoustic Wave Generated by Focused Nanosecond Laser Pulse at Air–solid Interface: Experiment and Modeling

Generation and evolution of plasma during femtosecond laser ablation of silicon in different ambient gases

Image feature analysis of plasma spot produced from femtosecond laser ablation for silicon wafer

Investigation of Air Plasma in Ultra-Short Laser Processing of Crystalline Silicon

Influence of liquid environments on femtosecond laser ablation of silicon

Characteristics of Micro Air Plasma Produced by Double Femtosecond Laser Pulses

Ultrafast observation of multiple shock waves evolution and interaction processes in femtosecond laser processing

Time-Resolved Shadowgraphic Imaging of Femtosecond Laser Ablated Micro-Holes in Silica Glass