Abstract:Material response and the launch of laser plasma during the 1064 nm nanosecond laser pulse induced damage to the exit surface of fused silica are investigated. Employing a polarization-based two-frame shadowgraphy setup with ～ 60 fs probing resolution, the transient material responses from the rising part of nanosecond pumping pulse to several hundred nanosecond timescale are captured. Using a shearing interferometry setup, the evolution of transient phase shift of laser plasma in the expansion process to the ambient air is also investigated. Inhomogeneous distribution of phase shift caused by the electrons and neutrals in the plasma is quantitatively resolved by employing the fast Fourier transform based filtering algorism. To demonstrate the evolutions of important plasma parameters such as pressure, temperature and density, a continuum hydrodynamic model is numerically solved. The initial pressure of plasma is estimated according to the point-explosion model, and the initial plasma temperature is achieved by calculating the difference between simulating shockwave front radius and experimental value at the same delay. The optimal temperature is chosen when the radius difference is minimal. Main conclusions are as follows. 1) Abundant suprathermal electrons are excited in the early energy deposition process. Part of these electrons contribute to the thermal transport process and produce the laser supported solid-state absorption front (LSSAF) which propagates into the bulk silica. Other electrons escape to the air side and contribute to the formation of air plasma through the impact ionization process. Plasma expansion speed is about 20 km/s during this phase. 2) When the pump pulse is terminated, the LSSAF and air plasma lose their energy supplied and experience a rapid decline of the temperature and expansion velocity. As a result, the final damage crater depth exhibits seldomly no increase compared with the transient crater depth during this phase. Hot bulk plasma formed in this phase becomes the damage precursor and induces the ejection of abundant neutrals probably due to the phase explosion mechanism. Inhomogeneous distribution of stress is formed by Rayleigh-Taylor instability at the interface between hot bulk plasma and surrounding bulk material during the expansion of LSSAF. Radial and circumferential cracks are formed due to the release of stress. 3) Evolution of air plasma follows the conventional evolution process of laser-induced plasma, i. e. , internal pressure, temperature and density decrease quickly with time delay. The simulated transient highest pressure is about 600 MPa. Simulation also predicts the formation of the internal shockwave. Our work will be helpful in understanding the laser damage mechanism of the fused silica optical window.

Structure-Mediated Excitation of Air Plasma and Silicon Plasma Expansion in Femtosecond Laser Pulses Ablation

Dynamics and its modulation of laser-induced plasma and shockwave in femtosecond double-pulse ablation of silicon

Enhancing the Expansion of a Plasma Shockwave by Crater-Induced Laser Refocusing in Femtosecond Laser Ablation of Fused Silica

Direct Observation of Structure-Assisted Filament Splitting During Ultrafast Multiple-Pulse Laser Ablation.

Generation and evolution of plasma during femtosecond laser ablation of silicon in different ambient gases

Femtosecond-Laser-Ablation Dynamics in Silicon Revealed by Transient Reflectivity Change

Ultrafast Dynamics of Femtosecond Laser Irradiation of Silicon with Different Fluence

Shock Induced Phenomena In High Fluence Femtosecond Laser Ablation Of Silica Glass

Formation Mechanisms of Silicon Surface Structuring using Single-Multiple Nanosecond Laser Pulses in Ambient Air and Cold Plasma

Delayed Phase Explosion During High-Power Nanosecond Laser Ablation of Silicon

Experimental and Computational Study of Damage Pocess Induced by 1064 Nm Nanosecond Laser Pulse on the Exit Surface of Fused Silica

Femtosecond Laser Ablation of Silicon in Air and Vacuum

Investigation of Air Plasma in Ultra-Short Laser Processing of Crystalline Silicon

Laser–plasma interaction and plasma enhancement by ultrashort double-pulse ablation

Experimental study on the laser-matter-plume interaction and its effects on ablation characteristics during nanosecond pulsed laser scanning ablation process.

Effects of plasma confinement on the femtosecond laser ablation of silicon

Effects of Parameters in Femtosecond Laser Micromachining on Ablation of Silicon

Plasma and Ablation Dynamics in Ultrafast Laser Processing of Crystalline Silicon

Plasma Dynamics in Ultra-Short Laser Ablation in Electronic Materials

Temporal Femtosecond Pulse Shaping Dependence of Laser-Induced Periodic Surface Structures in Fused Silica

Ultrafast observation of multiple shock waves evolution and interaction processes in femtosecond laser processing