Abstract:We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests were conducted at temperatures from 700 to 1100°C at strain rates ranging from 10-3 to 10 s-1. A sudden stress drop after yield point was observed at higher temperatures and lower strain rates with the Zener-Holloman parameter, lnZ, in the range of 17.2-20.7. Such a softening behavior can be related to the interaction of dislocations with short-range clustering. However, at higher strain rates or lower temperatures (lnZ>25.0), kink bands were activated being responsible for the continuous strengthening of the alloy in competition with the softening mechanism. Systematic TEM investigations reveal that dislocation walls formed along {110} planes and dislocation loops were observed at a low strain of 6% at a high strain rate of 1 s-1 and 800°C. Kink band induced dynamic recrystallization is evident upon further straining. On the other hand, at low strain rate of 10-3 s-1 and 800°C, discontinuous recrystallization mechanisms become dominant with arrays of dislocations forming in front of the bulged boundaries of parent grains. These sub-grain boundaries eventually turn into high-angle grain boundaries. We also investigate the deformation mechanism of the alloy under extremely high strain rate (103 s-1) at room temperature. The specimen exhibits extensive kink bands with arrays of dislocation walls. As further strained, multiple slip systems can be activated and the interaction of dislocation walls plays a vital role in the strain hardening of the alloy.

Strain Rate Sensitivity of Tensile Properties in High Nb Containing Tial Alloys

Strain Rate Sensitivity of Tensile Properties in Ti–47Al–2Mn–2Nb–0.8TiB2 Alloy

Strain-Rate-Dependent Tensile Response of Ti–5Al–2.5Sn Alloy

Strain Rate Sensitivity of Tensile Properties in Ti-6.6Al-3.3Mo-1.8Zr-0.29Si Alloy: Experiments and Constitutive Modeling

Strain-Rate Sensitivity of Tensile Behaviors for Nickel-Based Superalloys Gh3044 and Gh4033 at Room Temperature

Tensile mechanical behavior of TiAl(FL) at high strain rate

Strain rate effect on the tensile behavior of Duplex Ti–46.5Al–2Nb–2Cr intermetallics at elevated temperatures

Effect of Strain Rate and Temperature on the Deformation Behavior in a Ti-23.1Nb-2.0Zr-1.0O Titanium Alloy

High temperature deformation behaviors of a high Nb containing TiAl alloy

The Effect of Strain Rate on the Tensile Deformation Behavior of Single Crystal, Ni-Based Superalloys

High Strain-Rate Tensile Properties of Ti-47%Al-1.5%Cr-0.5%Mn-2.8%Nb

The Constitutive Responses of Ti-6.6Al-3.3Mo-1.8Zr-0.29Si Alloy at High Strain Rates and Elevated Temperatures

Tensile Behavior of Ti-5Al-2.5Sn Alloy at Low Temperatures and High Strain Rates

An Investigation on Dynamic Tensile Properties of TiAl Intermetallic Alloy

Dynamic Strain-Rate Effect On Uniaxial Tension Deformation Of Ti5al2.5sn Alpha-Titanium Alloy At Various Temperatures

Strain-rate Sensitivity and Fracture Mode of V–5Cr–5Ti Alloy

Strain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature

Microstructure evolvement of isometry TiAl under tensile impact loadings

Dynamic behavior and fracture mode of TiAl intermetallics with different microstructures at elevated temperatures

Dynamic tensile properties of Ti-47Al-2Mn-2Nb-0.8TiB2 alloy

Effect of Strain Rate on the Tension Behavior of Ti–6.6Al–3.3Mo–1.8Zr–0.29Si Alloy at Low Temperatures