Abstract:The high temperature tensile test of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy was carried out by electronic universal testing machine under the condition of 750–900 °C/10 −5 –10 −3 s −1 . The hot tensile stress-strain curves were analyzed, and the constitutive model under hot tensile conditions was established. The microstructure transformation rule and deformation mechanism during tensile process were determined. The results show that the hot tensile curve is longer in the steady-state flow stage corresponding to lower strain rate and higher tensile temperature, the true stress declines and the elongation at break increases. The constitutive equation was established based on the tensile curve data, and the corresponding thermal activation energy was 310.3 kJ/mol. As the rise of tensile temperature and the decline of strain rate, the proportion about cross-layer fracture in the tensile fracture morphology decreases, the number of dimples increases, more lamellar structures change into recrystallized structures, and the softening effect of the alloy is more obvious. The dislocation deformation mechanism mainly includes the existence of dislocation slip and climb, dislocation intersection and dislocation ring or dislocation network formation. Twinning deformation is also another important mechanism of high temperature tensile deformation of TiAl alloy. Twins are formed in parallel with each other, so that the deformation can be further carried out. The dislocations and twins in the deformed microstructure will provide nucleation conditions for recrystallized grains. The dynamic recrystallization(DRX) grains are preferentially formed around the grain boundary and the vicinity of dislocation and twin is also preferred nucleation site for DRX. The DRX behavior is the main softening mechanism, and DRX size and volume fraction corresponding to lower tensile rate and higher tensile temperature are larger.

High Strain-Rate Tensile Properties of Ti-47%Al-1.5%Cr-0.5%Mn-2.8%Nb

Dynamic tensile properties of Ti-47Al-2Mn-2Nb-0.8TiB2 alloy

Strain Rate Sensitivity of Tensile Properties in Ti–47Al–2Mn–2Nb–0.8TiB2 Alloy

Dynamic Tensile Properties of Ti-47al-2mn-2nb-0.8tib(2) Alloy

Tensile mechanical behavior of TiAl(FL) at high strain rate

An Investigation on Dynamic Tensile Properties of TiAl Intermetallic Alloy

Experimental Study of Ti-46.5Al-2Nb-2Cr with Three Different Microstructures under Elevated Temperatures and High Strain Rate

Strain rate effect on the tensile behavior of Duplex Ti–46.5Al–2Nb–2Cr intermetallics at elevated temperatures

Dynamic behavior and fracture mode of TiAl intermetallics with different microstructures at elevated temperatures

Microstructure and room temperature tensile property of as-cast Ti44Al6Nb1.0Cr2.0V alloy

Temperature-Dependent Tension Plastic Deformation and Fracture Behavior of Ti-6.6Al-3.3Mo-1.8Zr-0.29Si Alloy at High Strain Rates

Experimental studies on the dynamic tensile behavior of Ti–6Al–2Sn–2Zr–3Mo–1Cr–2Nb–Si alloy with Widmanstatten microstructure at elevated temperatures

High strain rate mechanical behavior of Ti-6Al-4V with micro–macro correlation under compressive loading

Tensile Impact Behavior and Deformation Mechanism of Duplex TiAl Intermetallics at Elevated Temperatures

Tensile impact behavior of duplex Ti-46.5Al-2Nb-2Cr at elevated temperatures

High temperature deformation behaviors of a high Nb containing TiAl alloy

Study on high temperature tensile constitutive behavior and deformation mechanism of Ti-47.5Al-2.5 V-1.0Cr-0.2Zr alloy

Cryogenic tensile properties of Ti-47Al-2Mn-2Nb alloy and their dependence on minor boron

Microstructure evolvement of isometry TiAl under tensile impact loadings

Strain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature

Mechanical properties, deformation behavior and microstructure evolution of Ti-43Al-6Nb-1Mo-1Cr alloys