Abstract:The development of high-speed aerial vehicles urgently requires high-performance integrated materials for ablation resistance, thermal insulation and oxidant protection under high temperature. The previously prepared carbon aerogel composites (C/CA), with ultra-high temperature thermal insulation properties, were impregnated with SiCO precursor sol and pyrolysed in nitrogen atmosphere at 1200?C. The impregnation/pyrolysis process was performed once, twice and thrice to obtain three different C/C-SiCO nanoporous ceramic composites. Further, TaSi2-MoSi2-borosilicate glass (TM-BG) coating or TaSi2-MoSi2-ZrB2-borosilicate glass (TMZBG) coating was prepared on the surface of the C/C-SiCO through slurry brushing combined with graphite powder embedded sintering process. By simulating the actual application environment through oxygen acetylene flame ablation test, the ablation resistance of the samples was studied and their oxidation mechanism was analysed. The results show that the ablation rate of the C/C-SiCO after 200 s ablation at 1600 ?C decreases with the increase of the number of impregnation/pyrolysis steps and that the ablation resistance of the coating modified C/C-SiCO was significantly enhanced. The addition of ZrB2 to the coating improves the compatibility between the substrates and the coating, and the TMZ-BG coated sample has better ablation resistance. At high temperature, the borosilicate glass in the coating is in a viscous flow state. Meanwhile the SiO2 generated by the oxidation of other silicide raw materials forms a dense glass layer on the coating surface, which can be used as an oxygen barrier to provide better protection for the substrates. The coating-modified C/C-SiCO porous ceramic composites are expected to be used as a high-temperature ablation-resistant material for the thermal protection system of new aerospace vehicles.

Long-life ablation resistance ZrB<sub>2</sub>-SiC-TiSi<sub>2</sub> ceramic coating for SiC coated C/C composites under oxidizing environments up to 2200 K

Long-life ablation resistance ZrB2-SiC-TiSi2 ceramic coating for SiC coated C/C composites under oxidizing environments up to 2200 K

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

SiC/ZrB2–SiC–ZrC Multilayer Coating for Carbon/carbon Composites Against Ablation

Ablation Resistance of SiC‐modified ZrC Coating Prepared by SAPS for SiC‐coated Carbon/carbon Composites

Ultra-high Temperature Ceramic Coating for Carbon/carbon Composites Against Ablation above 2000 K

Ablation Resistant ZrC Coating Modified by Polymer-Derived SiC/TiC Nanocomposites for Ultra-High Temperature Application

Ablation Resistance of ZrB2–SiC Coating Prepared by Supersonic Atmosphere Plasma Spraying for SiC-coated Carbon/carbon Composites

Ablation Behavior of a SiC/ZrC-SiC Coating on C/CA Composite for High-Temperature Thermal Protection

Ablation behavior of a SiC/ZrC–SiC coating on C/CA composite for high-temperature thermal protection

Ablation Resistance of (hf⅓zr⅓ta⅓)c Solid Solution Ceramic Coating for Carbon/carbon Composites at 2100 °C

Ablation Mechanism and Properties of SiO2 Modified ZrB2-SiC Coatings Fabricated on C/C Composites Via Plasma Spraying Technology

Study on Ablation Behavior of ZrB2-SiC Coating Based on the High Thermal Conductivity Substrate

ZrB2-SiC coating to protect carbon/carbon composites against ablation

Ablation Resistance of ZrC-based Composite Coating with Multi-Layer Structure for Carbon/carbon Composites above 2200 °C

A Multilayer SiC/ZrB2/SiC Ablation Resistance Coating for Carbon/Carbon Composites

Ablation Resistance of (hf1/3zr1/3ta1/3)c Solid Solution Ceramic Coating for Carbon/carbon Composites at 2100 ° C

Ablation Behavior of (Zr,ta)b2-Sic Coating on Carbon/carbon Composites at 2300 °C

Ablation Behavior of ZrB 2 -Based Coating Prepared by Supersonic Plasma Spraying for SiC-Coated C/C Composites under Oxyacetylene Torch

Ablation resistance of C/C-SiCo nanoporous ceramic composites with TaSi2-MoSi2-ZrB2-borosilicate glass coating

Ablation Resistance of SiC–ZrC Coating Prepared by a Simple Two-Step Method on Carbon Fiber Reinforced Composites