Abstract:The mechanical interaction between welded panel and fixture has a remarkable influence on the distribution of weld induced residual stress and distortion.Unfortunately,the influence of fixture is not generally included in conventional numerical simulations of welding process.In the present study,it is proposed that the numerical models in which the mechanical interaction between welded panel and fixture is considered as contact pair in the finite element analysis(FEA) of welding process.This could make the FEA of welding process more scientific and accurate.The fixture constraint plays an important role in accurate modeling of welding process.In the simulations,various mechanical constraint boundary conditions in welding process were thought about to establish the relationships of the normal and tangential mechanical interactions between welded panel and fixture. In Free model,the fixture restraint was not considered.In Mech model,the displacements of nodes where welded panel contacted with fixture were restricted in x,y,z directions.Hard model and Tabular model were contact models which included the fixture.In the normal direction,once welded panel and fixture were in contact,the transmitted contact pressure could be infinite in Hard model.While data pairs of contact pressure vs over-closure or clearance were specified to define a piecewise-linear relationship in the normal direction in Tabular model.A penalty friction coefficient of 0.3 was applied in tangential direction in both Hard and Tabular models.Fixture and welded panel were separated and the contact relationships were removed after the welding process in both Hard and Tabular models. The simulation results of contact models including fixture were more accurate,compared to models containing only welded panel with rigid restrictions.The distortion mode of welded panels under different fixture constraint conditions corresponded well with experimental results.The differences between the distributions of transverse stresses on top and bottom surfaces of welded panel at the beginning of welding process had a crucial influence on the distortion mode of welded panel.

Finite element analysis of HAZ effects on limit loads for mismatched welded joints

Effects of HAZ on limit loads for mismatched welded joints

Numerical Studies of Estimation of Fracture Parameters for Mismatched Welded Joints with HAZ Cracks

Limit load of mismatched welded joint containing cracks

Mismatch effect on safety assessment of pressure pipe with incomplete penetration defect

Equivalent Material Properties of the Heat-Affected Zone in Welded Cold-Formed Rectangular Hollow Section Connections

Experimental Investigation of Fatigue Behaviour for Welded Joint with Mechanical Heterogeneity

Prediction of Residual Stresses Distribution in Strength-Mismatched Butt Joints Using Finite Element Method

FE analysis of residual stress and welding deformation of a low-alloy UHS quenched steel fillet joint

The effect of yield strength mis-match on the fracture analysis of welded joints: slip-line field solutions for pure bending

Numerical Analysis of Constraint and Strength Mismatch Effects on Local Fracture Resistance of Bimetallic Joints

Misalignment Effect on Stress Concentration of Thickness Mismatched Plate Structures

Finite Element Analysis of the Effect of Strength Match on Ductile Fracture Welded Pipe

Effect of Strength Mismatch on Ductile Fracture Behavior of Welding Pipe

Misalignment effect on the fatigue failure behavior of load-carrying cruciform welded joints

An Experimental Investigation of In-Plane Constraint Effect on Local Fracture Resistance of A Dissimilar Metal Welded Joint

Out-of-plane Constraint Effect on Local Fracture Resistance of a Dissimilar Metal Welded Joint

Finite element calculation and regression analysis on stress concentration factors of undermatching butt joints

ESTABLISHMENT AND APPLICATION OF FIXTURE CONSTRAINT MODELS IN FINITE ELEMENT ANALYSIS OF WELDING PROCESS

Effect of Loading Methods on the Fatigue Properties of Dissimilar Al/Steel Keyhole-Free FSSW Joints

A Continuum Damage Model for Weld Heat Affected Zone under Low Cycle Fatigue Loading