Abstract:Stainless steel clad plate is widely used in petrochemical engineering because of its high strength and good corrosion resistance, but there are cracks to be always generated in clad metal during the fabrication and service. Welding is often used to repair the cracked zone in stainless steel clad plates, but the residual stress is generated inevitably during welding, which has a great effect on their structure integrity. Chinese code, safety assessment for in-service pressure vessels containing defects, requires through-thickness stress distribution, and assumes that the secondary membrane stress induced by welding is equal to the yield stress, and the bending stress is zero. This work uses a combination of neutron diffraction method and finite element method (FEM) to determine the residual stress in the repair weld of a stainless steel clad plate. It is found that there is a good agreement between FEM and experimental results. The residual stress is concentrated in the heat affected zone (HAZ) of the weld metal; and decreases gradually far away from this zone. Due to the local heating input difference through thickness of the clad plate, a bending stress is generated in it. In the clad metal, the maximum stress is located at HAZ, which has exceeded the yield strength because of work hardening. Therefore, the assessment result based on the code assumption would lead to a big difference from the actual one. The combined use of FEM and neutron diffraction can obtain both the stress values and through thickness stress distribution, which meet the requirement how to treat the welding residual stress in the structure integrity assessment code.

Finite element prediction of residual stresses and thermal distortion in a brazed plate-fin structure

Finite Element Analysis of Residual Stresses and Thermal Deformation for Brazing Plate-Fin Structure

3D Numerical Simulation of Brazed Residual Stress in Stainless Steel Plate-Fin Structure

Numerical Analysis of Residual Stress for Copper Base Brazed Stainless Steel Plate-Fin Structure

Modelling of temperature field and residual stress of vacuum brazing for stainless steel plate-fin structure

Three-dimensional Numerical Simulation of Brazed Residual Stress and Its High-Temperature Redistribution for Stainless Steel Plate-Fin Structure

3-D finite element analysis of residual stress and its creep relaxation at high temperature for stainless steel brazed plate-fin structure

Finite element analysis on electron beam brazing temperature and stresses of stainless steel radiator

Effect of Geometric Conditions on Residual Stress of Brazed Stainless Steel Plate-Fin Structure

Numerical Investigation of Deformation and Residual Stress in Vacuum Brazing of Titanium Alloy Plate-Fin Structure

A Comparison of Brazed Residual Stress in Plate–fin Structure Made of Different Stainless Steel

Effect of Brazing Residual Stress on Creep for Stainless Steel Plate-Fin Structure

Thermal-fluid-solid coupling analysis of vacuum brazing process for a titanium alloy plate-fin structure

The Effect of Filler Metal Thickness on Residual Stress and Creep for Stainless-Steel Plate–fin Structure

Study on Distribution and Optimization of Residual Stress Inside Plate-Fin Structure after Braze Welding

Finite Element Analysis of the Effect of Brazed Residual Stress on Creep for Stainless Steel Plate-Fin Structure

Numerical investigation on the effect of copper filler thickness on the brazed residual stress

Brazed Residual Stress in a Hollow-Tube Stacking: Numerical Simulation and Experimental Investigation

Fatigue Life Prediction of A Stainless Steel Plate-Fin Structure Using Equivalent-Homogeneous-Solid Method

A Study of Residual Stress in the Repair Weld of Stainless Steel Clad Plate by Neutron Diffraction Measurement and Finite Element Method

STUDY ON BRAZING RESIDUAL STRESS OF STAINLESS STEEL WITH ALUMINA BY FINITE ELEMENT METHOD