EFFECTS OF PREPARATION METHOD AND VARIOUS MODIFIERS ON THE THERMAL STABILITY OF ALUMINA
GuoXing NIU,Jianming He,Xiaoyin Chen,Yong Liu,Maiying Bian,Adi He
DOI: https://doi.org/10.3321/j.issn:0253-9837.1999.05.013
IF: 16.5
1999-01-01
Chinese Journal of Catalysis
Abstract:Two kinds of alumina were prepared by the glycerin complexing-assisted sol-gel method and the pyrolysis of boehmite sol. The effect of modifiers, such as La, Si, Ba and both of them, on the thermal stability of alumina were studied. The introducing methods of modifiers and the ratio of Si/Al are also discussed. Alumina that prepared by the complexing-assisted sol-gel method shows larger surface area and bigger pore size than that prepared by the pyrolysis of boehmite sol. It also exhibits higher thermal stability. Compared with the impregnation method, the introduction of La into the boehmite sol makes La more effective in stabilizing alumina. However, when alumina is prepared by the complexing-assisted sol-gel method, La introduced by impregnation displays slightly more effective. If La and Si or La and Ba are added simultaneously in the gel, multiple stabilization does increase further the stability of alumina against sintering. Even heated at 1 200°C for 2 h, multiple modified alumina can still hold its surface area larger than 40 m2/g. On the contrary, if La is impregnated separately on Si or Ba modified alumina, addition of La counteracts the stabilizing effect of Si or Ba. For Si modified alumina, increasing the Si content can increase the surface area of alumina if heated below 1 000°C. However, at 1 200°C, Si-modified alumina with the Si/La ratio of 4 has best thermal stability.