Abstract:The absorption heat exchanger is a key component in the novel district heating systems based on absorption cycles. It can maintain the primary water return temperature at a quite low level and realize covering more waste heat recycle. Because in most working conditions the temperature drop and rise in a single absorber or evaporator is as high as 20-30 K, the multi-stage structure of this device has been proposed. The theoretical analysis have shown that this kind of structure can make heat transfer process more matched to realize much lower outlet temperature of primary water, while single-stage structure can only achieve a relatively high level. This is because of the multi-stage pressure and temperature gradient. In this study, based on the absorption heat exchanger technology, a vertical three-stage absorber-evaporator experiment unit was designed and built. On a large vacuum test bench, experiments were carried out in different conditions to test the performance. The result shows the experiment unit can achieve large temperature difference on the water side and form three stages of evaporating pressure gradient. With three-stage evaporating pressure gradient, the large triangle heat transfer process disappeared. The most important thing is that it can reduce the water temperature of evaporator side to a low level. Compared with traditional single-stage absorption heat pump, the heat transfer process in the whole absorber and evaporator is more matched and the performance can be better. In the experiment, an important phenomenon shows that the outlet water temperature of the first stage absorber is even higher than the inlet solution temperature. A 1-D differential model was built to analyze and explain the temperature variation inside the device so this experimental phenomenon can be reasonably explained. Finally the experiment unit was directly applied in a real district heating system. It worked as part of a complete multi-stage absorption heat exchanger in one thermal station of the district heating system. The machine has great performance in different heating conditions. It also formed three stages of evaporating pressure gradient. The primary water return temperature, that is, the water outlet temperature of the evaporator, can be as low as 25℃. The temperature level is satisfying and brings lots of benefits to the whole heating system.

Design and Experimental Study of a Second Type Absorption Heat Exchanger

A Two-Stage Vertical Absorption Heat Exchanger for District Heating System

A Multi-Section Vertical Absorption Heat Exchanger for District Heating Systems

Experimental Study of Heat Exchanger Basing on Absorption Cycle for Chp System

Experimental study on three types of transcritical carbon dioxide heat pump water heater systems

Experimental Study and Application of Multi-Stage Absorber/ Evaporator Based on Absorption Heat Exchanger

Experimental Investigations on the Temperature Lift Performance of a Novel Diffusion Absorption Heat Transformer

Experimental assessment of a detachable plate falling film heat and mass exchanger couple using lithium bromide and water as working fluids

Performance and optimization of absorption heat exchanger under different flow rate ratio conditions

Investigations on the Cycle Performance of a Diffusion Absorption Heat Transformer Using HCOOK As an Alternative to LiBr

Experimental Investigation on an Absorption Heat Transformer for Production of Hot Water or Steam Generation

Absorption heat exchangers for long distance heat transportation

Optimization of solution flow rate and heat transfer area allocation in the two-stage absorption heat exchanger system based on a complete heat and mass transfer simulation model

Investigation on Operation Strategy of Absorption Heat Exchanger for District Heating System

Optimization Design of the Large Temperature Lift/drop Multi-Stage Vertical Absorption Temperature Transformer Based on Entransy Dissipation Method

Performance Analysis of an Absorption Heat Transformer with Different Working Fluid Combinations

Performance Analysis on the Large Temperature Lift/Drop Multi-stage Vertical Absorption Temperature Transformer

Application of hollow fiber membrane solution heat exchanger to absorption refrigeration systems

Design and analysis of an ammonia-water absorption heat pump

Conjugate Heat and Mass Transfer Study of a New Open-Cycle Absorption Heat Pump Applied to Total Heat Recovery of Flue Gas

Investigation of a Novel High Temperature Heat Exchanger with Hybrid Internally and Externally Finned Tubes