Abstract:Modified polypentafluorophenyl methacrylate with side‐groups of both POSS and alkane is prepared and blended with polypropylene through melt‐blending process. It is proved that this blend not only demonstrates durable hydrophobicity and enhanced mechanical properties due to its surface segregation, orientation, and crosslinking, but also can maintain those properties under many extreme conditions. Durable functionalization on polypropylene (PP) surfaces is always a key problem to besolved. Coatings with low surface energy peel off easily especially under extreme conditions, owing to their weak adhesion. In this paper, side groups of both polyhedral oligomeric silsesquioxane (POSS) and alkane are grafted to polypentafluorophenyl methacrylate (PFP), and then PP blends with these side‐group modified PFP are obtained through a melt‐blending process. It is found that POSS can result in surface segregation and provide hydrophobicity in blends. Microfibers are formed because of the orientation effect during the tensile testing, which furtherly promotes mechanical strength. Significantly, alkaneside‐groups can be entangled with PP segments, which brings about cross linking. Therefore, with crosslinking and synchronous orientation of POSS, the elongation at the break of blends is greatly increased up to 974%. The final blend demonstrates quite durable hydrophobicity under many extreme conditions, such as repeated tape peeling, ultrasonic washing, strong friction, and soaking in strong acid (pH = 1), strong alkali (pH = 14) and alcohol. The heat and UV resistance of the blend are also obviously improved. This study will develop anovel and facile strategy to endow PP with durable hydrophobicity as well as greatly enhanced mechanical properties.

Adhesion Properties of Atactic Polypropylene/acrylate Blend Copolymer and Its Adhesion Mechanism for Untreated Polypropylene Materials

Simultaneous Graft Polymerization of Polypropylene with Maleic Anhydride and Butyl Acrylate

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Synthesis and Characterization of High‐density Polypropylene‐grafted Polyethylene Via a Macromolecular Reaction and Its Rheological Behavior

THE STUDY OF APPLIED BEHAVIOR OF PP/PA6 BY USING GRAFTED POLYPROPYLENE AS COMPATILIZER

Polypropylene Blends with Durable Hydrophobicity and Enhanced Mechanical Properties Based on POSS and Alkane Modified Polypentafluorophenyl Methacrylate

Study on Solid Phase Grafting of Acrylic Acid onto Polypropylene to Prepare Hydrophilic Polypropylene

Enhancing Mechanical Performance of High-Lignin-Filled Polypropylene via Reactive Extrusion

The effect of addition of poly(propylene-g-acrylic acid) on the morphology of poly(vinyl methylether) and isotactic polypropylene blend

Preparation of toughened polypropylene-g-poly (butyl acrylate-Co-acrylated castor oil) by suspension grafting polymerization

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

Preparation of Polypropylene/acrylonitrile–styrene Copolymer Alloys by One‐step Reactive Blending

Synthesis of multifunctional polypropylene via solid phase cografting and its grafting mechanism

Improved Mechanical and Thermal Properties of Polypropylene Blends Based on Diethanolamine-Plasticized Corn Starch Via in Situ Reactive Compatibilization

Polypropylene/polypropylene-grafted acrylic acid copolymer/ethylene–Acrylic acid copolymer ternary blends for hydrophilic polypropylene

Improving the Shear and Tack Strengths of Chlorinated Poly(propylene carbonate) through Chain Extension with Polylactic Acid for Biodegradable Hot Melt Adhesives

Synthesis of Polypropylene- Grafted Graphene and Its Compatibilization Effect on Polypropylene/ Polystyrene Blends

Synthesis of Multifunctional Polypropylene Via Solid Co-Grafting and the Mechanism Study.

Effect of Surface Treatment of Glass Fibres on Adhesion to Polypropylene Resin

Interface Physical Influence on Mechanic Properties of PP/AS Modified Polymer Caused by Maleic Anhydride