Abstract:In the present work, ethylene-propylene block copolymer (EP90) and ethylene-propylene random copolymer (EPR) were separated from a PP/EPR in-reactor alloy. The EP90 and EPR were then blended with neat isotactic polypropylene (PP) at various proportions to obtain ternary blends. The isothermal crystallization kinetics and morphology of the ternary blends were studied and were compared with those of PP/EP90 binary blend. It is observed that the Avrami exponent increases with crystallization temperature for all the blends, but the PP/EP90/EPR ternary blends compared to the PP/EP90 binary blend exhibit larger Avrami exponents. The crystallization rate decreases as the crystallization temperature increases, as it is indicated by the increase of crystallization half-time. At the same crystallization temperature, the PP/EP90 binary blend exhibits the slowest crystallization rate. The data of crystallization kinetics were also analyzed with Hoffman-Lauritzen crystallization regime theory. It is found that all the blends crystallize in regime III. The increase in the content of EPR in the ternary blends is followed by increases in secondary nucleation constant, the free energy of the chain folding surface, and the chain folding work. The blends were etched with xylene at room temperature and at 80°C to remove EPR and EP90, respectively, and their morphology was studied with scanning electronic microscopy (SEM). The SEM results reveal that the block component EP90 is partially miscible with both PP and EPR, leading to increase in both domain number and domain size. Since both EPR and EP90 retard crystallization of PP in the PP/EPR and PP/EP90 binary blends, we speculate that the miscibility of EPR and EP90 can weaken the interference of EP90 on crystallization of neat PP.

Polypropylene/polypropylene-grafted acrylic acid copolymer/ethylene–Acrylic acid copolymer ternary blends for hydrophilic polypropylene

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Ternary blends from biological poly(3-hydroxybutyrate-co-4-hydroxyvalerate), poly(L-lactic acid), and poly(vinyl acetate) with balanced properties

Compatibilization And Toughening Of Immiscible Ternary Blends Of Polyamide 6, Polypropylene (Or A Propylene-Ethylene Copolymer), And Polystyrene

The effect of addition of poly(propylene-g-acrylic acid) on the morphology of poly(vinyl methylether) and isotactic polypropylene blend

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Miscibility, crystallization and mechanical properties of poly[(3‐hydroxybutyrate)‐ co ‐(4‐hydroxyvalerate)]/poly(propylene carbonate)/poly(vinyl acetate) ternary blends

Crystallization kinetics and morphology of iso-PP/ethylene-propylene-b- copolymer/ ethylene-propylene-r-copolymer ternary blends

Structure and Mechanical Properties of PP/EPDM/Attapulgite Ternary Blends

Crystallization Behavior of the Blends of Isotactic Polypropylene and Ethylene-Propylene Blocky Copolymers

Ternary Blends from Biological Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate), Poly(propylene carbonate) and Poly(vinyl acetate) with Balanced Properties

Ternary blends from biodegradable poly(L-lactic acid), poly(ε-caprolactone) and poly(vinyl acetate) with balanced properties

Influences of component ratio of minor phases and charge sequence on the morphology and mechanical properties of PP/PS/PA6 ternary blends

Polypropylene toughened with ethylene-n-butyl acrylate-carbon monoxide terpolymer: structure–property relationship

Study on Solid Phase Grafting of Acrylic Acid onto Polypropylene to Prepare Hydrophilic Polypropylene

Hydrogen Bond Mediated Partially Miscible Poly(n-Acryloyl Piperidine)/poly(acrylic Acid) Blend with One Glass Transition Temperature

Studies on blends of LLDPE and polar polymers compatibilized by a random copolymer

Novel Strategy for Ternary Polymer Blend Compatibilization

Crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate)/poly(vinyl pyrrolidone) ternary blends

Non-isothermal Crystallization Behavior of Compatibilized Polypropylene/recycled Polyethylene Terephthalate Blends

Compatibilization Effect of PP-g-(MAH/VAc) on Polypropylene/Polyamide 6 Blends