Abstract:CsPbI3 perovskite quantum dots (QDs) have attracted much attention in the field of solar cells because of their excellent photovoltaic properties. Conventional modification of long−chain insulating ligands can ensure good dispersion and film−forming stability of QDs, but the limitations of their low defect passivation ability and poor charge transport ability will make them fail to achieve high efficiency in the corresponding solar cell devices. In this study, by introducing “Benzylphosphonic acid” short−chain ligands to the surface of CsPbI3 QDs, the ligands were re−administered on the surface during the preparation of the CsPbI3 QDs as well as during the film−forming process. The strong coordination ability of Benzenephosphonic acid can effectively passivate defects on the surface of CsPbI3 QDs and inhibit non−radiative recombination and phase transition. Meanwhile, this short−chain ligand can effectively promote the charge exchange between adjacent QDs and improve the electrical transport properties of the film. The efficiency of the Benzylphosphonic acid−modified CsPbI3 QDs solar cell reaches 13.91% compared to the unmodified device (PCE of 11.4%). The storage stability and operation stability of the device are also significantly improved. (The efficiency remains at 91% of the original for 800 h of atmospheric storage; the efficiency remains at 92% of the original for 200 h of continuous light exposure.) The present strategy realizes the simultaneous improvement of photovoltaic properties and stability of CsPbI3 QD solar cells and also provides a reference for surface ligand engineering to realize highly efficient and stable perovskite quantum dot solar cells.

Quasi-quantum Dot-Induced Stabilization of Α-Cspbi3perovskite for High-Efficiency Solar Cells

Surface Ligand Management for Stable FAPbI3 Perovskite Quantum Dot Solar Cells

B-site Doping of CsPbI3 Quantum Dot to Stabilize the Cubic Structure for High-Efficiency Solar Cells

Α-Cspbi3 Colloidal Quantum Dots: Synthesis, Photodynamics, and Photovoltaic Applications

Ultrathin Dimethylammonium Iodide Matrix: Suppressing Octahedral Distortion and Reconstructing Surface Ligands for Efficient CsPbI3 Quantum Dot Photovoltaics

Ligand-assisted cation-exchange engineering for high-efficiency colloidal Cs<sub>1-<i>x</i></sub>FA<i><sub>x</sub></i>PbI<sub>3</sub> quantum dot solar cells with reduced phase segregation

Quantum Dot Interface-Mediated CsPbIBr 2 Film Growth and Passivation for Efficient Carbon-Based Solar Cells

Tailoring Surface Chemistry of CsPbI3 Perovskite Quantum Dots Using Multifunctional Ligand Enables Efficient and Stable Solar Cells

Ligand-assisted cation-exchange engineering for high-efficiency colloidal Cs1−xFAxPbI3 quantum dot solar cells with reduced phase segregation

α-CsPbI3 Colloidal Quantum Dots: Synthesis, Photodynamics and Photovoltaic Applications

Inhibiting lattice distortion of CsPbI3 perovskite quantum dots for solar cells with efficiency over 16.6%

Stepwise−Process−Controlled Ligand Management Strategy for Efficient and Stable Perovskite Quantum Dot Solar Cells

Thermodynamically Stabilized Β-Cspbi 3 –based Perovskite Solar Cells with Efficiencies >18%

Quantum dot-modified CsPbIBr2 perovskite absorber for efficient and stable photovoltaics

Short‐Chain Ligand‐Passivated Stable α‐CsPbI3 Quantum Dot for All‐Inorganic Perovskite Solar Cells

Passivation Effect of CsPbI<sub>3</sub> Quantum Dots on the Performance and Stability of Perovskite Solar Cells

Tuning the Surface-Passivating Ligand Anchoring Position Enables Phase Robustness in CsPbI 3 Perovskite Quantum Dot Solar Cells

Modified Surface Ligand Management of CsPbI3 Perovskite Quantum Dots Enables Efficient and Stable Electroluminescent Solar Cells

Tuning the Surface-Passivating Ligand Anchoring Position Enables Phase Robustness in CsPbI<sub>3</sub> Perovskite Quantum Dot Solar Cells

Healing the defects in CsPbI3 solar cells by CsPbBr3 quantum dots

Aromatic amine-assisted pseudo-solution-phase ligand exchange in CsPbI<sub>3</sub> perovskite quantum dot solar cells