Abstract:CsPbIBr2 perovskite, as a promising light harvester, possesses the most balanced bandgap and stability characters among all-inorganic perovskite materials. However, the poor quality of the traditionally one-step solution-processed CsPbIBr2 film always leads to a severe recombination loss and thus a low output potential difference (V oc). Herein, we demonstrate a novel vapor-assisted deposition strategy to construct high-quality CsPbIBr2 films for the first time, in which the crystallization kinetics of the CsPbIBr2 is more easily controllable than that of the one-step spin-coated one. The PbBr2 film acting as the template in the CsPbIBr2 crystal growth is firstly prepared via an antisolvent-washing technique and CsI is then vacuum evaporated onto the PbBr2 layer. By precisely tuning the thickness of the CsI film, highly phase-pure and crystallized CsPbIBr2 crystals are successfully obtained. The optimized CsPbIBr2 film also exhibits a homogeneous morphology and full coverage over the substrate with large grain sizes up to microscale and ultrahigh light absorption capability. The corresponding carbon-based CsPbIBr2 solar cells achieve a champion power conversion efficiency of 8.76% with a superior V oc of 1.289 V. The large-area (1 cm2) devices also deliver an efficiency of 6.78% with an impressive V oc of 1.336 V. Moreover, under the protection of the highly hydrophobic and chemically stable CuPc layer and carbon counter electrode, the unencapsulated devices present excellent moisture and thermal stabilities. Our work provides a new approach for the preparation of cost-effective, highly efficient and robust CsPbIBr2 photovoltaics.

Thermodynamically Stabilized Β-Cspbi 3 –based Perovskite Solar Cells with Efficiencies >18%

A Stabilized Γ-Cspbi3 by Poly(allylamine Hydrochloride) for Wide-Band Gap Perovskites Solar Cells with Enhanced Performance

Bifunctional Stabilization of All-Inorganic Α-Cspbi3 Perovskite for 17% Efficiency Photovoltaics.

Stabilizing Gamma-Cspbi3 Perovskite Via Phenylethylammonium For Efficient Solar Cells With Open-Circuit Voltage Over 1.3 V

Stabilizing γ‐CsPbI 3 Perovskite via Phenylethylammonium for Efficient Solar Cells with Open‐Circuit Voltage over 1.3 V

Graded Bandgap CsPbI2+Br1− Perovskite Solar Cells with a Stabilized Efficiency of 14.4%

Synergistic Stabilization of CsPbI3 Inorganic Perovskite Via 1D Capping and Secondary Growth

Efficient and Stable CsPbI3 Solar Cells Via Regulating Lattice Distortion with Surface Organic Terminal Groups

Vapor-assisted deposition of CsPbIBr2 films for highly efficient and stable carbon-based planar perovskite solar cells with superior Voc

Thermodynamically Stable Orthorhombic Γ-Cspbi3 Thin Films for High-Performance Photovoltaics.

Europium-Doped CsPbI2Br for Stable and Highly Efficient Inorganic Perovskite Solar Cells

Manipulating the Crystallization and Phase Transition for High-Performance CsPbI<sub>2</sub>Br Solar Cells

Fabrication of High-Quality CsPbI3 Perovskite Films with Phosphorus Pentachloride Additive for Highly Stable Solar Cells

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

Investigation Of Cspbbr3 Films With Controllable Morphology And Its Influence On The Photovoltaic Properties For Carbon-Based Planar Perovskite Solar Cells

Temperature-assisted Crystallization for Inorganic CsPbI2Br Perovskite Solar Cells to Attain High Stabilized Efficiency 14.81%

Stabilizing CsPbI3 perovskite for photovoltaic applications

In Situ Observation and Control of Crystallization Dynamics for Stable and Efficient CsPbI3-Based 2D Perovskite Solar Cells

Inorganic CsPb1−xSnxIBr2 for Efficient Wide‐Bandgap Perovskite Solar Cells

Intermediate Phase-Assisted Sequential Deposition Toward 15.24%-Efficiency Carbon-Electrode Cspbi<sub>2</sub>br Perovskite Solar Cells

High Phase Stability in CsPbI3 Enabled by Pb–I Octahedra Anchors for Efficient Inorganic Perovskite Photovoltaics