Abstract:Colloidal quantum dots(CQDs)are extremely promising infrared optoelectronic materials for efficient solar cells owing to their strong infrared absorption with tunable spectra.However,the liquid-state ligand exchange of CQDs using ammonium acetate(AA)as an additive generally resulted in intensive charge-transport barriers within the CQD solids.This is induced by the high-bandgap PbI2 matrix,which considerably affects the charge-carrier extraction of CQD solar cells(CQDSCs),and thus their photovoltaic performance.Herein,dimethylammonium iodide(DMAI)was used as an additive instead for the liquid-state ligand exchange,substantially eliminating the PbI2 matrix capping the CQDs and simultaneously restraining CQD fusion during the ligand exchange,thereby reducing the barriers for the charge-carrier transport within the CQD solids.Extensive experimental studies and theoretical calculations were performed to link the surface chemistry of the CQDs with the charge-carrier dynamics within the CQD solids and full solar cell devices.The theoretical calculation results reveal that DMAI which possess small dissociation energy could finely regulate the ligand exchange of CQDs,resulting in the suppressed energetic disorder and diminished charge-transport barriers in the CQD solids compared to those of the CQD solids prepared using AA.The DMAI-treated quantum dots were characterized and analyzed by transmission electron microscopy,X-ray photoelectron spectroscopy,and 2D grazing-incidence wide-and small-angle X-ray scattering spectrometry.The results show PbI2-related Bragg peaks in the AA-treated CQD solid films,indicating a thick layer of PbI2 crystal matrix being formed in the CQD solids,whereas there was no obvious PbI2 signal observed in DMAI-treated CQD solids.These results also demonstrate that DMAI provides additional I-,improving the surface passivation of the CQDs and reducing trap-assisted recombination.For the infrared photovoltaic applications,the CQDSC devices were fabricated,which shows that the photovoltaic performance of CQDSCs was significantly improved.The power conversion efficiency of DMAI-based CQDSCs was improved by 17.8％compared with that of the AA-based CQDSC.The charge-carrier dynamics in both CQD solids and full solar cell devices were analyzed in detail,revealing that the improved photovoltaic performance in DMAI-based CQDSCs was attributed to the facilitated charge-carrier transport within the CQD solids and suppressed trap-assisted recombination,resulting from eliminated charge-transport barriers and improved surface passivation of CQDs,respectively.This work provides a new avenue to controlling the surface chemistry of infrared CQDs and a feasible approach to substantially diminishing the charge transfer barriers of CQD solids for infrared solar cells.

Ultrathin Dimethylammonium Iodide Matrix: Suppressing Octahedral Distortion and Reconstructing Surface Ligands for Efficient CsPbI3 Quantum Dot Photovoltaics

Quasi-quantum Dot-Induced Stabilization of Α-Cspbi3perovskite for High-Efficiency Solar Cells

Inhibiting lattice distortion of CsPbI3 perovskite quantum dots for solar cells with efficiency over 16.6%

In Situ Formation of Iodide Precursor for Perovskite Quantum Dots with Application in Efficient Solar Cells

Colloidal Quantum Dot Solids with a Diminished Epitaxial PbI2 Matrix for Efficient Infrared Solar Cells

Tailoring Surface Chemistry of CsPbI3 Perovskite Quantum Dots Using Multifunctional Ligand Enables Efficient and Stable Solar Cells

Surface Ligand Management Aided by a Secondary Amine Enables Increased Synthesis Yield of CsPbI3Perovskite Quantum Dots and High Photovoltaic Performance

Ligand-assisted cation-exchange engineering for high-efficiency colloidal Cs<sub>1-<i>x</i></sub>FA<i><sub>x</sub></i>PbI<sub>3</sub> quantum dot solar cells with reduced phase segregation

Surface Ligand Management for Stable FAPbI3 Perovskite Quantum Dot Solar Cells

B-site Doping of CsPbI3 Quantum Dot to Stabilize the Cubic Structure for High-Efficiency Solar Cells

Tailoring Solvent-Mediated Ligand Exchange for CsPbI3 Perovskite Quantum Dot Solar Cells with Efficiency Exceeding 16.5%

Ionic Liquids Modulating CsPbI3 Colloidal Quantum Dots Enable Improved Mobility for High-Performance Solar Cells.

Surface Matrix‐Mediated Cation Exchange of Perovskite Quantum Dots for Efficient Solar Cells

In Situ Iodide Passivation Toward Efficient CsPbI3 Perovskite Quantum Dot Solar Cells

Ionic Liquids Modulating CsPbI 3 Colloidal Quantum Dots Enable Improved Mobility for High-Performance Solar Cells

Ligand-assisted cation-exchange engineering for high-efficiency colloidal Cs1−xFAxPbI3 quantum dot solar cells with reduced phase segregation

Modified Surface Ligand Management of CsPbI3 Perovskite Quantum Dots Enables Efficient and Stable Electroluminescent Solar Cells

α-CsPbI3 Colloidal Quantum Dots: Synthesis, Photodynamics and Photovoltaic Applications

High‐Efficiency Perovskite Quantum Dot Photovoltaic with Homogeneous Structure and Energy Landscape

In Situ Growth of Strained Matrix on CsPbI3 Perovskite Quantum Dots for Balanced Conductivity and Stability

Α-Cspbi3 Colloidal Quantum Dots: Synthesis, Photodynamics, and Photovoltaic Applications