Abstract:Solution-processed semiconductors have opened promising avenues for next-generation semiconductor and optoelectronic industries. Colloidal quantum dots (QDs) as one of the most typical materials are widely utilized for the design and development of light-emitting diodes, photodetectors, and solar cells. Recently, an emerging process of PbS QD ink has been employed to attain world record power conversion efficiency by surface passivation using a PbI2 ligand to form PbI2–PbS and the process optimization in the field of photovoltaics. However, the bonding and debonding of the ligands on the surface of PbS QDs are dynamic reversible processes in an ink environment. The uncoordinated Pb2+ defects induced by unbonded PbS QDs serve as the recombination sites. Thus, the present ink process leaves much room for the enhancement by surface passivation of PbS QDs. Herein, we devise an efficient strategy with a supplementary phenethylammonium iodide (PEAI) ligand for the formation of the PEAI–PbS interface in PbS QD ink-processed solar cells. This newly developed method can not only improve the passivation on the QD surface by iodine ions but also simultaneously enhance the carrier collection efficiency by a graded energy alignment between PbI2–PbS and PEAI–PbS layers. The corresponding power conversion efficiency of the optimized device has significantly increased by approximately 20% more than the control device. As a result, such a robust and efficient method regarded as a strategic candidate can overcome the bottleneck of imperfect passivation caused by a large specific surface area and loose bonding ligands, eventually promoting the industrial application of QDs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c08135?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c08135</a>.Absorbance results, description for detailed testing conditions, TEM images of OA–PbS QDs, XPS spectra of QD films about I 3d signal, FTIR data for QD films, device performances of PbS QDs by different supplemental treatment condition (ligands/concentration/annealing temperature/immersing time/solvents), AFM images of control and PEAI-QD films, XRD of QD films, SEM image of control and PEAI-QD films, UPS of ZnO and EDT–PbS QD films, TA results of control and PEAI-QD films, EIS spectra of the photovoltaic devices, and device performance as a function of CQD film thickness (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08135/suppl_file/am0c08135_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Tuning the Surface-Passivating Ligand Anchoring Position Enables Phase Robustness in CsPbI 3 Perovskite Quantum Dot Solar Cells

Surface Ligand Management for Stable FAPbI3 Perovskite Quantum Dot Solar Cells

Stepwise−Process−Controlled Ligand Management Strategy for Efficient and Stable Perovskite Quantum Dot Solar Cells

Inhibiting lattice distortion of CsPbI3 perovskite quantum dots for solar cells with efficiency over 16.6%

Tailoring Solvent-Mediated Ligand Exchange for CsPbI3 Perovskite Quantum Dot Solar Cells with Efficiency Exceeding 16.5%

Ligand-assisted cation-exchange engineering for high-efficiency colloidal Cs1−xFAxPbI3 quantum dot solar cells with reduced phase segregation

CH 3 NH 3 PbBr 3– x I x Quantum Dots Enhance Bulk Crystallization and Interface Charge Transfer for Efficient and Stable Perovskite Solar Cells

High‐Efficiency Perovskite Quantum Dot Photovoltaic with Homogeneous Structure and Energy Landscape

Establishing Multifunctional Interface Layer of Perovskite Ligand Modified Lead Sulfide Quantum Dots for Improving the Performance and Stability of Perovskite Solar Cells

Design and Synthesis of Fluorinated Quantum Dots for Efficient and Stable 0D/3D Perovskite Solar Cells

Surface Matrix‐Mediated Cation Exchange of Perovskite Quantum Dots for Efficient Solar Cells

Enhanced Passivation and Carrier Collection in Ink-Processed PbS Quantum Dot Solar Cells via a Supplementary Ligand Strategy

Improved Absorber Phase Stability, Performance, and Lifetime in Inorganic Perovskite Solar Cells with Alkyltrimethoxysilane Strain-Release Layers at the Perovskite/TiO<sub>2</sub> Interface

Performance Enhancement of Hole Transport Layer-Free Carbon-Based CsPbIBr2 Solar Cells through the Application of Perovskite Quantum Dots

Enhanced Performance of Perovskite Solar Cells Loaded with Iodine-Rich CsPbI 3 Quantum Dots

Antisolvent‐Assisted in Situ Cation Exchange of Perovskite Quantum Dots for Efficient Solar Cells

Carbon-Based Stable CsPbIBr 2 Solar Cells with Efficiency of over 10% from Bifunctional Quinoline Sulfate Modification

Ionic Liquids Modulating CsPbI 3 Colloidal Quantum Dots Enable Improved Mobility for High-Performance Solar Cells

Porphyrinic Metal–Organic Framework Quantum Dots for Stable n–i–p Perovskite Solar Cells

Perovskite Solar Cells: Surface Ligand Management Aided by a Secondary Amine Enables Increased Synthesis Yield of CsPbI 3 Perovskite Quantum Dots and High Photovoltaic Performance (Adv. Mater. 32/2020)

Effect of Side-Group-Regulated Dipolar Passivating Molecules on CsPbBr 3 Perovskite Solar Cells