Abstract:In the field of automatic test systems, direct digital synthesis (DDS) technology plays a crucial role with features such as fast frequency switching speed, high-frequency resolution, and flexible waveforms. However, the timing resolution of the pulse waveform generated by DDS technology is limited by the storage depth of waveform memory and sampling rate. DDS generates a maximum 1 clock cycle jitter in the pulse waveform as the frequency tune word (FTW) changes driven by the sampling clock, and the pulse width modulation (PWM) of the pulse waveform is not possible with DDS technology. In this paper, a parallel pulse waveform synthesis method based on real-time computation is proposed. The pulse waveform generated by this method has a timing resolution that far exceeds the sampling period including rising time resolution, falling time resolution, pulse width resolution, and delay resolution. Since the pulse parameters such as rising time, falling time, and pulse width can be independently adjusted with phase continuity, and the waveform samples are generated by real-time computation, the method can easily implement PWM and various modulations. The waveform samples computed in real-time correspond precisely to their theoretical phases with extremely low phase truncation error, thus jitter is greatly reduced and the timing resolution can be significantly improved. In this paper, based on the real-time computation of waveform samples, the sampling rate is increased eight times by parallelizing the computation. Each computing channel is run at 156.25 MHz, and the sampling rate of 1.25 GSPS waveform samples is achieved by running in parallel with eight channels. Finally, the pulse waveform is generated with a timing resolution of 0.2 ps, which theoretically requires a sampling rate of 5 TSPS to achieve.

Research and Verification on Real-Time Interpolated Timing Algorithm Based on Waveform Digitization

A New Method of Waveform Digitization Based on Time-Interleaved A/D Conversion

An FPGA-based, High-Precision, Narrow Pulse Width Measurement Time-to-digital Converter

Study on FPGA-based multi-channel digitizing method for nuclear pulse amplitude

A Time-Driven FPGA-based Fast Nuclear Charge Digitization Method

High-precision time measurement electronics using the bandpass sampling method

A 1.6-Gsps High-Resolution Waveform Digitizer Based on a Time-Interleaved Technique

An FPGA-Based High Precision Pulse Width Measurement Time-to-Digital Converter with Dual-TDL Multiplexer Encoder

An FPGA Based Fast Linear Discharge Method for Nuclear Pulse Digitization

Design and Implementation of a Ultra-High Timing Resolution Pulse Generator Based on Real-Time Computation

Design of Time-to-Digital Converters for Time-Over-Threshold Measurement in Picosecond Timing Detectors

A High-Precision 2.5-Ps RMS Time Synchronization for Multiple High-Speed Transceivers in FPGA

A High Precision Time-to-Digital Converter based on Multi-chain Interpolation with a Low Cost Artix-7 FPGA

Timing Optimization For Digital Pet Detector Module Based On Fpga-Only Mvt Digitizers

An FPGA-based Time Sampling Charge Measurement Method for TOF-PET Detectors

A Linear Time-Over-Threshold Digitizing Scheme and Its 64-Channel Daq Prototype Design on Fpga for A Continuous Crystal Pet Detector

A Field-Programmable-Gate-Array Based Time Digitizer for the Time-Of-Flight Mass Spectrometry

A High-Throughput Vernier Time-to-Digital Converter on FPGAs with Improved Resolution Using a Bi-Time Interpolation Scheme

130+ ps Coincident Time Resolution With 20mm Crystal Length Using 28 nm Xilinx FPGA

Testing of SCA Waveform Digitization ASIC for High-Precision Time Measurement

The design of a time-interleaved analog-digital conversion modulator based on FPGA-TDC for PET application