Abstract:As silicon photomultiplier (SiPM) technology develops, its possible applications are being growingly expanded. However, the current technical obstacle is the signal readout from large-scale, multi-pixel SiPMs, especially in a large nuclear imaging device. Although the application-specific integrated circuits (ASICs) provide ways to reach that goal, it needs a long period with iterative electronic process and a very high cost. We developed a high-integrated positron emission tomography (PET) electronics system with field programmable gate array based charge-to-digital converter (FPGA-QDC) technology instead of the ASICs. Unlike traditional FPGA-based charge readout method in which low-voltage differential signaling (LVDS) receivers serve as analog voltage comparators, in the proposed electronics system voltage-referenced receivers work as analog comparators.Theoretically, nearly all of input/output (I/O) ports in the FPGA can achieve the function of analog comparators using voltage-referenced I/O standard. The electronics system is constructed using off-the-shelf low-cost commercial components. Therefore, it is feasible to fast build a distributed readout system with multiple such electronics system. The flexibility and reconfigurability of the FPGA provide multi-channel grouping and diverse triggering for different kinds of detector configurations, such as row/column summation and resistor-based readout. These features are greatly sought after in readout electronics for the SiPM-based radiation detectors. Experimental results show that the proposed highly-integrated electronics system overcomes the bottleneck that has limited the development of advanced PET detectors and scanners.

Study on FPGA-based multi-channel digitizing method for nuclear pulse amplitude

A Novel Nuclear Pulse Digitizing Scheme Using Time over Dynamic Threshold

An FPGA Based Fast Linear Discharge Method for Nuclear Pulse Digitization

An FPGA-based 64-channel DAQ system using linear time-over-threshold scheme for a continuous crystal PET detector

A Time-Driven FPGA-based Fast Nuclear Charge Digitization Method

Design of the multi-channel pulse amplitude analyzer based on FPGA

A Linear Time-Over-Threshold Digitizing Scheme and Its 64-Channel Daq Prototype Design on Fpga for A Continuous Crystal Pet Detector

The design of a time-interleaved analog-digital conversion modulator based on FPGA-TDC for PET application

Design and preliminary performance of a novel mixed-signal front-end electronics with post digital shaping for CZT detectors

Design of multi-channel pulse amplitude analyzer based on FPGA

An FPGA-based, High-Precision, Narrow Pulse Width Measurement Time-to-digital Converter

Design of Time Digital Converter Based on FPGA

An FPGA-Based High Precision Pulse Width Measurement Time-to-Digital Converter with Dual-TDL Multiplexer Encoder

Implementation of FPGA based real-time digital DAQ for high resolution, and high count rate nuclear spectroscopy application

A 72-Channel Fpga-Only Mvt Digitizer Board And A Micro-System For Coincidence Detection/Imaging

An FPGA Charge-to-Digital Converter Based on Voltage-Referenced Receivers for PET Applications

A 128-Channel High Performance Time-to-Digital Converter Implemented in an UltraScale FPGA

A compact and highly integrated 128-channel FPGA-based readout electronics for nuclear imaging application

Study on Nuclear Pulse Signal Processing Method Based on DSP Techniques

Low-Cost FPGA TDC with High Resolution and Density

Resources-limited FPGA based-multi-channel TDC system