Abstract:Abstract Most of the recent nanodevices are fabricated by using high-efficiency deposition methods and patterned via high-resolution lithography. However, there are drawbacks for the methods including small-scale product, high cost consumption, and multi-step processes. To reduce these disadvantages, this work focuses on the usage of sol-gel synthesis and spin coating method to fabricate ZnO seed layer onto glass substrates. All of substrates were patterned by conventional UV photolithography at exposure time of 7 seconds, then ZnO nanorods were hydrothermally grown at 90°C for 2, 3, and 4 hours, respectively. All of samples were characterised by scanning electron microscope (SEM) which revealed the sharp and smooth tip hexagonal structure at different hydrothermal time. The evolution of the nanorods’ growth was investigated, and the diameters were estimated. Moreover, crystal quality was revealed by x-ray diffractograms. It was clear that the domination of c-axis plane occurred for all the samples associates with the crystallinity of the nanostructures. This indicated escalating of the non-monodirectional growth plane in increasing nanorods’ diameter as the nanorods are polycrystal. Furthermore, the optical properties of the samples were observed by UV-visible spectroscopy and photoluminescence technique (PL). UV-visible spectroscopic data showed diminishing of the energy band gap when the diameter grew up. PL data revealed the reduction of the intensity ratio at near-band-edge peak versus oxygen vacancy peak. This information pointed to the decreasing trend of the crystal quality with escalating growth time.

Effect of Growth Time and Annealing on the Structural Defect Concentration of Hydrothermally Grown Zno Nanowires

Synthetic and Effect of Annealing on the Luminescent Properties of Zno Nanowire

Annealing-Induced Change of Hydrogen Behavior in Zno Nanorods Revealed by Photoluminescence

Effect of Electrodeposition Time on Microstructure, Wettability and Optical Properties of ZnO Nanorod Arrays

Effect of UV irradiation on the properties of ZnO nanorod arrays prepared by hydrothermal method

Enhanced Visible Light Response of ZnO Porous Thin Film by Post-Annealing Treatment

Growth And Characterization Of Cu-Catalyzed Zno Nanowires

Annealing Effects on the Microstructure and Photoluminescence Properties of Ni-Doped Zno Films

Effects of Annealing on the Ferromagnetism and Photoluminescence of Cu-Doped Zno Nanowires

Influence of hydrothermal time on structural properties of ZnO nanorods grown on spin-coated ZnO seeding layer

Photoluminescence enhancement of ZnO nanowire arrays by atomic layer deposition of ZrO2 layers and thermal annealing.

Detailed Study on Photoluminescence Property and Growth Mechanism of ZnO Nanowire Arrays Grown by Thermal Evaporation

Fabrication of Zno Nanoneedle/Nanocolumn Composite Films and Annealing Induced Improvement in Their Microstructural and Photoluminescence Characteristics

Study on the Structural and Physical Properties of ZnO Nanowire Arrays Grown Via Electrochemical and Hydrothermal Depositions

Full-color Photoluminescence of ZnO Nanorod Arrays Based on Annealing Processes

Influence of Annealing on Microstructure and Photoluminescence Properties of Al-Doped ZnO Films

Metastability effects on the photoluminescence of ZnO nano-micro structures grown at low temperature and influence of the precursors on their morphology and structure

The Growth and Annealing of Single Crystalline Zno Films by Low-Pressure Mocvd

Enhanced Field Emission from Zno Nanorods Via Thermal Annealing in Oxygen

Studies on improving the PL spectra of ZnO nanowire

Defect Emissions in ZnO Nanostructures