Abstract:Abstract Most of the recent nanodevices are fabricated by using high-efficiency deposition methods and patterned via high-resolution lithography. However, there are drawbacks for the methods including small-scale product, high cost consumption, and multi-step processes. To reduce these disadvantages, this work focuses on the usage of sol-gel synthesis and spin coating method to fabricate ZnO seed layer onto glass substrates. All of substrates were patterned by conventional UV photolithography at exposure time of 7 seconds, then ZnO nanorods were hydrothermally grown at 90°C for 2, 3, and 4 hours, respectively. All of samples were characterised by scanning electron microscope (SEM) which revealed the sharp and smooth tip hexagonal structure at different hydrothermal time. The evolution of the nanorods’ growth was investigated, and the diameters were estimated. Moreover, crystal quality was revealed by x-ray diffractograms. It was clear that the domination of c-axis plane occurred for all the samples associates with the crystallinity of the nanostructures. This indicated escalating of the non-monodirectional growth plane in increasing nanorods’ diameter as the nanorods are polycrystal. Furthermore, the optical properties of the samples were observed by UV-visible spectroscopy and photoluminescence technique (PL). UV-visible spectroscopic data showed diminishing of the energy band gap when the diameter grew up. PL data revealed the reduction of the intensity ratio at near-band-edge peak versus oxygen vacancy peak. This information pointed to the decreasing trend of the crystal quality with escalating growth time.

Effect of UV irradiation on the properties of ZnO nanorod arrays prepared by hydrothermal method

Effect of ammonia on morphology, wettability and photoresponse of ZnO nanorods grown by hydrothermal method

Effect of Electrodeposition Time on Microstructure, Wettability and Optical Properties of ZnO Nanorod Arrays

Thermal-desorption Induced Enhancement and Patterning of Ultraviolet Emission in Chemically Grown ZnO

Performance Improvement of Ultraviolet Sensor of ZnO Nanorod Arrays

Effect of Reaction Temperature on Surface Morphology and Photoelectric Properties of ZnO Grown by Hydrothermal Method in Mixed Solvent

Effects of Electrodeposition Electrolyte Concentration on Microstructure, Optical Properties and Wettability of ZnO Nanorods

Conversion of large-scale oriented ZnO rod array into nanotube array under hydrothermal etching condition via one-step synthesis approach

Ordered Growth and Photoluminescence of ZnO Nano-Arrays on Silicon Substrates with Seed Film by Hydrothermal Method

Alignment-controlled Hydrothermal Growth of Well-Aligned ZnO Nanorod Arrays

Hydrothermal Synthesis of Well-Aligned ZnO Nanorod Arrays on Silicon

Enhancement And Patterning Of Ultraviolet Emission In Zno With An Electron Beam

The effect of pre-annealing of sputtered ZnO seed layers on growth of ZnO nanorods through a hydrothermal method

Fabrication and optical property of ZnO nanorod array by hydrothermal method

Growth of flower-like ZnO on ZnO nanorod arrays created on zinc substrate through low-temperature hydrothermal synthesis

Structural and morphology of ZnO nanorods synthesized using ZnO seeded growth hydrothermal method and its properties as UV sensing

Structure Transformation of Hydrothermally Treated ZnO Nanorod Array

The optical properties of ZnO nanorod arrays prepared through hydrothermal synthesis for solar cell application

Hydrothermal Synthesis and Optical Properties of ZnO Nanostructured Films Directly Grown From/on Zinc Substrates

Influence of hydrothermal time on structural properties of ZnO nanorods grown on spin-coated ZnO seeding layer

Density-controlled Hydrothermal Growth of Well-Aligned ZnO Nanorod Arrays