Abstract:Introduction Reducing CO2 emissions for addressing climate change concerns is becoming increasingly important as the CO2 concentration in the atmosphere has increased rapidly since the industrial revolution. Most of currently investigated mitigation processes require CO2 in a concentrated form. However, CO2 is emitted from large sources, such as coal-fired power plants, at ~15% concentration. Therefore, capturing CO2 from dilute streams is an important step for many mitigation methods. Membrane separation methods are particularly promising due to potentially high CO2 selectivities and fluxes. By a proper choice of the pore size and surface properties, the CO2 transport across a membrane can be facilitated with respect to those of N2 and O2 leading to an efficient CO2 separation process. However, current membranes suffer from a poor control over the pore size on the 2-4 nm scale and surface properties required for CO2 separation. 2 We describe here novel mesoporous silica membranes containing surface-attached amino groups promising for CO2 separation from dilute sources. Defect-free mesoporous silica membranes on porous alumina supports exhibiting 26~28A pores were obtained by spin-coating (~5-7 μm thick) and solution growth methods. Several kind of amino groups were attached to the membrane surface using amino-containing silicon alkoxides, such as 3-aminopropyltriethoxysilane. Smaller pores (~18-22A) were obtained by silylating the original calcined membranes with silane coupling agents. The characterization of the silylated silica membranes by BET surface area measurements, N2 adsorption pore size analysis and TGA confirmed that silylation technique was successful in decreasing the membrane pore size by ~8 A which is required for completely filling the pore volume with surface attached aminopropylsilyl groups and achieving facilitated transport of CO2. CO2/N2 separation on amine-modified silica membranes was investigated at 20-70C and transmembrane pressure drop of 0.2-1 atm as a function of the pore size and the nature of the amino group using a Wicke-Kalenbach permeability cell. The membrane performance was evaluated with respect to permeance and separation selectivity, determined by a GC/MS analysis of the feed, permeate, and retentate streams.

Membrane for desorbing CO2 from solution containing CO2 and preparation method of membrane

Study on Polydimethylsiloxane Desorption Membrane of CO 2 - Dimethyl Carbonate System

Preparation and Performance Evaluation of an Asymmetric Polyimide Membrane Used in a Novel Solvent Absorption-Membrane Desorption CO2 Capture

Preparation and Performance Evaluation of an Asymmetric Polyimide Membrane Used in a Novel Solvent Absorption-Membrane Desorption CO 2 Capture

Preparation and Separation Performance of PDMS Composite Membranes for CO2 Separation from CO2-DMC System

Hybrid Organosilica Membrane with High CO2 Permselectivity Fabricated by a Two-Step Hot Coating Method

Study on CO2 Desorption Behavior of a PDMS-SiO2 Hybrid Membrane Applied in a Novel CO2 Capture Process.

CO2 trapping method combining dimethyl carbonate absorption and membrane desorption

Study on desorption of CO2-rich solution by membrane

Preparation of a novel dual-layer polyvinylidene fluoride hollow fiber composite membrane with hydrophobic inner layer for carbon dioxide absorption in a membrane contactor

Solvent for capturing CO2 and preparation method of solvent for capturing CO2

Absorbent for collecting and separating CO2 and use thereof

Microporous polypropylene hollow fiber membranes contactor for the separation and fixation of carbon dioxide from simulative flue gas

High-performance multi-layer composite membrane with enhanced interlayer compatibility and surface crosslinking for CO2 separation

Ultrahigh permeation of CO2 capture using composite organosilica membranes

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Enhancement of CO2 Desorption from a Novel Absorbent (dimethyl Carbonate) by Using a PDMS/TiO2 Pervaporation Membrane

Improving CO2 Permeation and Separation Performance of CO2-philic Polymer Membrane by Blending CO2 Absorbents

Ordered Mesoporous Silica Membranes for CO2 Separation from Flue Gas

Fabrication of a super hydrophobic polyvinylidene fluoride–hexadecyltrimethoxysilane hybrid membrane for carbon dioxide absorption in a membrane contactor

High-efficiency CO2 separation using hybrid LDH-polymer membranes