Abstract:Rectisol processes, as traditional precombustion capture processes, have been plagued by high energy consumption and secondary environmental pollution. A new organic solvent absorption-membrane desorption method is expected to solve the above problems, but there is a huge challenge in developing organic solvent-resistant membranes. Although polyimide with good resistance, high flux, and high selectivity is the best choice for membrane materials, due to the high viscosity and easy curing characteristics of polyimide casting solution, it is not easy to prepare a stable membrane by conventional membrane preparation methods such as scraping, casting, and so on. In this paper, a new preparation method of an asymmetric solvent-resistant polyimide CO2 permeation membrane based on the spin-coating method was developed. Using a cellulose acetate ultrafiltration membrane as the support layer and polyimide as the active layer, an asymmetric solvent-resistant membrane was prepared by the spin-coating method and evaporative phase transformation that selectively desorbed CO2 from methanol-rich solution. The effects of the casting liquid concentration, rotating coating speed, drying temperature, and different types of polyimides on the properties of the desorption membrane were studied. Optimal conditions were determined, with a 17 wt % casting liquid concentration, 1000 rpm rotational coating speed, 45 degrees C drying temperature, and a 4:1 ratio of PI84 to PIMM. Under these conditions, a solvent-resistant desorption membrane was achieved, exhibiting a flux of 903.4 g/(m(2)h) and a selectivity factor of 14.1. Compared to traditional gas stripping, the membrane desorption process proves to be cost-effective, yielding >99% pure CO2. These results demonstrate a novel and promising method for capturing CO2 effectively and economically for industrial purposes.

Study on Polydimethylsiloxane Desorption Membrane of CO 2 - Dimethyl Carbonate System

Performance study of moisture swing adsorption membrane for CO_2 capture from ambient air

Study on CO2 Desorption Behavior of a PDMS-SiO2 Hybrid Membrane Applied in a Novel CO2 Capture Process.

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Deep Eutectic Solvents Formed by Novel Metal-Based Amino Acid Salt and Dihydric Alcohol for Highly Efficient Capture of Co2

Membrane for desorbing CO2 from solution containing CO2 and preparation method of membrane

Enhancement of CO2 Desorption from a Novel Absorbent (dimethyl Carbonate) by Using a PDMS/TiO2 Pervaporation Membrane

Preparation and Separation Performance of PDMS Composite Membranes for CO2 Separation from CO2-DMC System

Preparation and Performance Evaluation of an Asymmetric Polyimide Membrane Used in a Novel Solvent Absorption-Membrane Desorption CO2 Capture

Preparation and Performance Evaluation of an Asymmetric Polyimide Membrane Used in a Novel Solvent Absorption-Membrane Desorption CO 2 Capture

Study on desorption of CO2-rich solution by membrane

Ultrahigh permeation of CO2 capture using composite organosilica membranes

In-situ Synthesis of ZIF-8 on Mixed Matrix PDMS Membrane for Enhanced Desorption of CO2 from Dimethyl Carbonate

Research Progress of CO2 Recovery and Capture by Membrane Technology

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

CO2 trapping method combining dimethyl carbonate absorption and membrane desorption

Performance Evaluation of CO2 Capture with Diethyl Succinate

Research Progress of Polymer Membranes in CO2 Capture

Performance Evaluation of CO2Capture with Diethyl Carbonate

Experiment and Simulation Study of CO2 Solubility in Dimethyl Carbonate, 1-Octyl-3-methylimidazolium Tetrafluoroborate and Their Mixtures

Chemical modification of dimethylpolysiloxane for enhancement of CO2 binding enthalpy