Abstract:Rectisol processes, as traditional precombustion capture processes, have been plagued by high energy consumption and secondary environmental pollution. A new organic solvent absorption-membrane desorption method is expected to solve the above problems, but there is a huge challenge in developing organic solvent-resistant membranes. Although polyimide with good resistance, high flux, and high selectivity is the best choice for membrane materials, due to the high viscosity and easy curing characteristics of polyimide casting solution, it is not easy to prepare a stable membrane by conventional membrane preparation methods such as scraping, casting, and so on. In this paper, a new preparation method of an asymmetric solvent-resistant polyimide CO2 permeation membrane based on the spin-coating method was developed. Using a cellulose acetate ultrafiltration membrane as the support layer and polyimide as the active layer, an asymmetric solvent-resistant membrane was prepared by the spin-coating method and evaporative phase transformation that selectively desorbed CO2 from methanol-rich solution. The effects of the casting liquid concentration, rotating coating speed, drying temperature, and different types of polyimides on the properties of the desorption membrane were studied. Optimal conditions were determined, with a 17 wt % casting liquid concentration, 1000 rpm rotational coating speed, 45 degrees C drying temperature, and a 4:1 ratio of PI84 to PIMM. Under these conditions, a solvent-resistant desorption membrane was achieved, exhibiting a flux of 903.4 g/(m(2)h) and a selectivity factor of 14.1. Compared to traditional gas stripping, the membrane desorption process proves to be cost-effective, yielding >99% pure CO2. These results demonstrate a novel and promising method for capturing CO2 effectively and economically for industrial purposes.

In-situ Synthesis of ZIF-8 on Mixed Matrix PDMS Membrane for Enhanced Desorption of CO2 from Dimethyl Carbonate

Study on CO2 Desorption Behavior of a PDMS-SiO2 Hybrid Membrane Applied in a Novel CO2 Capture Process.

Enhancement of CO2 Desorption from a Novel Absorbent (dimethyl Carbonate) by Using a PDMS/TiO2 Pervaporation Membrane

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Study of mixed matrix membranes with in situ synthesized zeolite imidazolate frameworks (ZIF-8, ZIF-67) in polyethersulfone polymer for CO2/CH4 separation

Preparation and Separation Performance of PDMS Composite Membranes for CO2 Separation from CO2-DMC System

High-performance carbonized ZIF-8-doped hybrid carbon molecular sieve membrane for CO2/N2 separation

Study on Polydimethylsiloxane Desorption Membrane of CO 2 - Dimethyl Carbonate System

Mixed-matrix membranes comprising porous organic molecular cage for efficient CO2 capture

Mixed matrix composite membranes with MOF-protruding structure for efficient CO 2 separation

Preparation and Performance Evaluation of an Asymmetric Polyimide Membrane Used in a Novel Solvent Absorption-Membrane Desorption CO2 Capture

Fabrication of a superhydrophobic mixed matrix PVDF-SiO2-HDTMS hollow fiber membrane for membrane contact carbon dioxide absorption

Microporous Adsorbent-Based Mixed Matrix Membranes for CO2/N2 Separation

Preparation and Performance Evaluation of an Asymmetric Polyimide Membrane Used in a Novel Solvent Absorption-Membrane Desorption CO 2 Capture

Ultrahigh permeation of CO2 capture using composite organosilica membranes

Highly Permeable Mixed Matrix Materials Comprising ZIF-8 Nanoparticles in Rubbery Amorphous Poly(ethylene Oxide) for CO2 Capture

Membrane fabricated via a facile non-solvent induced microstructure re-arrangement with superior CO 2 separation performances

Rapid Fabrication of High‐Permeability Mixed Matrix Membranes at Mild Condition for CO2 Capture (Small 19/2023)

Mechanochemical synthesized amino-functionalized ultramicroporous ZIF based mixed-matrix membranes for CO 2 separation

Fabrication of Highly Efficient ZIF-8@PEI Monoliths for CO2 Capture Using Phosphorylated Cellulose Nanofiber as a Binder

In situ synthesis of polymer grafted ZIFs and application in mixed matrix membrane for CO 2 separation