Abstract:As the atmospheric carbon dioxide (CO2) concentration rapidly rises, carbon capture, utilization, and storage (CCUS) is an emerging field for climate change mitigation. Various carbon capture technologies are in development with the help of adsorbents, membranes, solvent-based systems, etc. One of the main challenges in this field is the removal of CO2 from nitrogen (N2) gas. This paper focuses on mixed matrix membrane technology, for which the CO2/N2 separation performance is based on differences in gas permeations. Membrane separation and purification technologies are widely studied for carbon capture. Microporous adsorbents such as zeolites and metal organic frameworks (MOFs) for carbon capture have been attracting researchers' attention due to their highly porous structures, high selectivity values, and tunable porosities. Utilizing microporous adsorbents dispersed within a novel, blended polymer matrix, fourteen membranes were prepared with the commercial MOF ZIF-8, zeolite 13X, and kaolin, with methyl cellulose (MC) and polyvinyl alcohol (PVA), which were tested using a single gas permeation setup in this study. The addition of polyallylamine (PAH) as a chemisorbent was also investigated. These membranes were synthesized both with and without a polyacrylonitrile (PAN) support to compare their performances. MC was found to be an ideal polymeric matrix component to develop free-standing MMMs. At 24 °C and a relatively low feed pressure of 2.36 atm, a free-standing zeolite-13X-based membrane (MC/PAH/13X/PVA) exhibited the highest N2/CO2 selectivity of 2.8, with a very high N2 permeability of 6.9 × 107 Barrer. Upon the optimization of active layer thickness and filler weight percentages, this easily fabricated free-standing MMM made of readily available materials is a promising candidate for CO2 purification through nitrogen removal.

Rapid Fabrication of High‐Permeability Mixed Matrix Membranes at Mild Condition for CO2 Capture (Small 19/2023)

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Mixed matrix composite membranes with MOF-protruding structure for efficient CO 2 separation

ZIF-8/GO sandwich composite membranes through a precursor conversion strategy for H<sub>2</sub>/CO<sub>2</sub> separation

ZIF-L Membrane with a Membrane-Interlocked-support Composite Architecture for H2/CO2 Separation

In-situ Synthesis of ZIF-8 on Mixed Matrix PDMS Membrane for Enhanced Desorption of CO2 from Dimethyl Carbonate

Membrane fabricated via a facile non-solvent induced microstructure re-arrangement with superior CO 2 separation performances

New Generation High Performance Composite Hollow Fiber Membranes for Low Cost Co2 Capture

Mixed-matrix membranes comprising porous organic molecular cage for efficient CO2 capture

PEO-based mixed matrix membranes containing N-doped microporous carbon microparticles for enhanced CO2/N2 separation

Mechanochemical synthesized amino-functionalized ultramicroporous ZIF based mixed-matrix membranes for CO 2 separation

Mixed matrix membranes for CO2 separations by incorporating microporous polymer framework fillers with amine-rich nanochannels

Thermally Annealed High-Aspect-Ratio ZIF-8 Nanoplates-Incorporated Mixed Matrix Membranes for Improved H2/CO2 Selectivity

Sustainable Fabrication of the Zeolitic Imidazolate Framework-67 Membrane via Supercritical Fluid Processing of the Co-Based Gel Layer

Enhanced CO 2 Separation by Functionalized g-C 3 N 4 Nanosheets as Composite Filler to Fabricate Mixed Matrix Membranes

Microporous Adsorbent-Based Mixed Matrix Membranes for CO2/N2 Separation

Fast Fabrication of Freestanding MXene-ZIF-8 Dual-Layered Membranes for H2/CO2 Separation

ZIF-301 MOF/6FDA-DAM polyimide mixed-matrix membranes for CO2/CH4 separation

Low-crystallinity ZIF-8/dcIm Membranes for CO2 Sieving

Scalable Mof-Based Mixed Matrix Membranes with Enhanced Permeation Processes Facilitate the Scale Application of Membrane-Based Carbon Capture Technologies