Abstract:In this paper, we propose mixed metal ions in the node of the zeolitic imidazolate framework (ZIF) structure. The hybrid metal ZIF is formed for the gas separation of hydrogen and carbon dioxide. In the first stage, the nanoparticles were prepared as a coating on a substrate, and acting as secondary growing nuclei. The hybrid metal ZIF structures were characterized by X-ray diffractometry (XRD) and Fourier transform infrared spectroscopy (FTIR). N2 adsorption–desorption isotherms determined surface area, and scanning electron microscopy (SEM) was used to observe the microstructure and surface morphology. The hybrid metal ZIF-8-67 powder had the largest surface area (1260.40 m2 g−1), and the nanoparticles (100 nm) could be fully dense-coated on the substrate to benefit the subsequent membrane growth. In the second stage, we prepared the hybrid metal ZIF-8-67 membrane on the pre-seeding substrate with mixed metal nanoparticles of cobalt and zinc, by the microwave hydrothermal method. Cobalt ions were identified in the tetrahedral coordination through UV–Vis, and the membrane structure and morphology were determined by XRD and SEM. Finally, a gas permeation analyzer (GPA) was used to determine the gas separation performance of the hybrid metal ZIF-8-67 membrane. We successfully introduced zinc ions and cobalt ions into the ZIF structure, where cobalt had a strong interaction with CO2. Therefore, GPA analysis showed an excellent H2/CO2 separation factor due to lower CO2 permeability. The CO2 permeance was ~0.65 × 10−8 mol m−2 s−1 Pa−1, and the separation factors for H2/CO2 and H2/N2 were 9.2 and 2.9, respectively. Our results demonstrate that the hybrid metal ZIF-8-67 membrane has a superior H2/CO2 separation factor, which can be attributed to its very high specific surface area and structure. Based on the above, hybrid metal ZIF-8-67 membranes are expected to be applied in hydrogen or carbon dioxide gas separation and purification.

Fast Fabrication of Freestanding MXene-ZIF-8 Dual-Layered Membranes for H2/CO2 Separation

Tubular MXene/SS Membranes for Highly Efficient H2/CO2 Separation

ZIF-8/GO Sandwich Composite Membranes Through a Precursor Conversion Strategy for H2/CO2 Separation

Self-assembly of defect-free polymer-based zeolite imidazolate framework composite membranes with metal-phenolic networks for high efficient H<sub>2</sub>/CH<sub>4</sub> separation

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Metal–organic framework channelled graphene composite membranes for H2/CO2 separation

Room-temperature in situ synthesis of MOF@MXene membrane for efficient hydrogen purification

Porous Stainless Steel Hollow Fiber-Supported ZIF-8 Membranes Via FCDS for Hydrogen/carbon Dioxide Separation

Plasma-Assisted Synthesis of ZIF-8 Membrane for Hydrogen Separation

ZIF-L Membrane with a Membrane-Interlocked-support Composite Architecture for H2/CO2 Separation

Dual-module Integration of Large-Area Tubular 2D MXene Membranes for H2 Purification

Ultrathin and Self-Supporting MOF/COF-Based Composite Membranes for Hydrogen Separation and Purification from Coke Oven Gas

Flexible Soft-Solid Metal-Organic Framework Composite Membranes for H2 /CO2 Separation

Fabrication of ZIF-8 Membranes on Dual-Layer ZnO-PES/PES Organic Hollow Fibers by In-Situ Crystallization

Synthesis and Characterization of Hybrid Metal Zeolitic Imidazolate Framework Membrane for Efficient H2/CO2 Gas Separation

Fast Hydrogen Purification Through Graphitic Carbon Nitride Nanosheet Membranes

Porous Polyethersulfone-Supported Zeolitic Imidazolate Framework Membranes for Hydrogen Separation

Highly efficient H 2 /CO 2 separation via an ultrathin metal-organic framework membrane

Rational Design of MXene Hollow Fiber Membranes for Gas Separations

Fast‐Current‐Driven Synthesis of Ultrathin ZIF ‐8 Membrane on Ceramic Tube for Propene/Propane Separation