Abstract:Selective catalytic reduction technology is the most commonly used method for NOx control, but the preparation process of the catalysts is complicated and the preparation cost is high. In this study, a novel low-cost catalyst for selective catalytic reduction of nitrogen oxides was prepared by treating vanadium-bearing steel slag with calcination modification and sulfuric acid modification. The activity test results show that the calcination modification can slightly improve the high-temperature activity of the catalysts. Among acid-modified catalysts, sulfuric acid modification can greatly improve the denitration activity of the catalyst, and calcination of the catalyst before sulfuric acid modification can obtain a higher activity denitration catalyst. The NOx removal efficiency of VSS-C-S catalyst reached 82.4% at 250°C. In addition, the catalyst modified with sulfuric acid after calcination has better water and sulfur resistance and regeneration performance. In the case of high water vapor and sulfur dioxide concentration, its denitration efficiency is 62.5%. The characterization results show that both calcination modification and sulfuric acid modification can promote the formation of α-Fe2O3, but calcination modification reduces the specific surface area and redox capacity of the catalysts. The sulfuric acid modification can form a new pore structure and a large number of sulfate species on the catalyst surface, and improve the existing state of vanadium species in the catalysts. The specific surface area of VSS-C-S catalyst is 43.90m2·g-1. Meanwhile, the adsorbed oxygen content of VSS-C-S catalyst is 24% higher than that of VSS-S-5 catalyst. It shows that the modification effect of sulfuric acid can be better exerted by calcination first and then modification with sulfuric acid. The results of in-situ DRIFTS experiments show that the NH3-SCR reaction of the calcined modified catalyst mainly follows the L-H mechanism. The NH3-SCR reaction of sulfuric acid-modified catalysts mainly follows the E-R mechanism. The active sites on the VSS-C-S catalyst surface adsorb a large amount of NH3 species and activate them as NH2 active intermediates, which directly react with gaseous NO. Therefore, the catalyst modified with sulfuric acid after calcination has higher activity. The work provides a novel idea for reducing catalysts cost and promoting cleaner production.

Low temperature denitration and synergetic desulfurization active carbon catalyst and preparation method thereof

Study and optimization of catalytic oxidation technology in spent caustic desulfurization

Denitration catalyst containing tungsten tin manganese cerium composite oxide as well as preparation and application of denitration catalyst

Co-precipitation preparation method of composite oxide denitration catalyst

Mixed synergistically-enhanced low-temperature SCR denitration catalyst and preparation method thereof

SCR (selective catalytic reduction) denitration catalyst for accelerating ammonium hydrogen sulfate decomposition by low-temperature flue gas, preparation method and application

RESEARCH STATUS OF LOW-TEMPERATURE DENITRIFYING CATALYSTS

Denitration catalyst with tungstovanadophosphoric heteropolyacid as precursor and preparation method of denitration catalyst

Mn-Ce supported low temperature denitration catalyst and preparation method thereof

Formation mechanism,effects and prevention of NH4HSO4 formed on the surface of V2O5 based catalysts

Ordered mesoporous carbon loading Cu-Mn bi-metal denitration catalyst and preparation method thereof

Preparation and catalytic behaviors of iron-based V-W-Ti catalyst: A novel strategy for low-temperature denitrification and synergistic toluene removal

Ce(SO4)2/α-Fe2O3 selective catalytic reduction of NOx with NH3: preparation, characterization, and performance

Cu SSZ 13 molecular sieve based catalyst adopting core shell structure as well as preparation and application of catalyst

Investigation of modified carbon-based catalyst on low-temperature selective reduction of flue gas denitration performance

Preparation method of honeycomb carrier catalyst for molecular sieve denitration

Experimental study on integrated desulfurization and denitrification of low-temperature flue gas by oxidation method

Simultaneous removal of SO2 and NO by CO reduction over prevulcanized Fe2O3/AC catalysts

Industrial furnace sulfur trioxide pre removing and denitration device and method

Low-Temperature SCR Catalyst Development and Industrial Applications in China

Vanadium-bearing steel slag catalysts for selective catalytic reduction of NOx by NH3