Abstract:Selective catalytic reduction technology is the most commonly used method for NOx control, but the preparation process of the catalysts is complicated and the preparation cost is high. In this study, a novel low-cost catalyst for selective catalytic reduction of nitrogen oxides was prepared by treating vanadium-bearing steel slag with calcination modification and sulfuric acid modification. The activity test results show that the calcination modification can slightly improve the high-temperature activity of the catalysts. Among acid-modified catalysts, sulfuric acid modification can greatly improve the denitration activity of the catalyst, and calcination of the catalyst before sulfuric acid modification can obtain a higher activity denitration catalyst. The NOx removal efficiency of VSS-C-S catalyst reached 82.4% at 250°C. In addition, the catalyst modified with sulfuric acid after calcination has better water and sulfur resistance and regeneration performance. In the case of high water vapor and sulfur dioxide concentration, its denitration efficiency is 62.5%. The characterization results show that both calcination modification and sulfuric acid modification can promote the formation of α-Fe2O3, but calcination modification reduces the specific surface area and redox capacity of the catalysts. The sulfuric acid modification can form a new pore structure and a large number of sulfate species on the catalyst surface, and improve the existing state of vanadium species in the catalysts. The specific surface area of VSS-C-S catalyst is 43.90m2·g-1. Meanwhile, the adsorbed oxygen content of VSS-C-S catalyst is 24% higher than that of VSS-S-5 catalyst. It shows that the modification effect of sulfuric acid can be better exerted by calcination first and then modification with sulfuric acid. The results of in-situ DRIFTS experiments show that the NH3-SCR reaction of the calcined modified catalyst mainly follows the L-H mechanism. The NH3-SCR reaction of sulfuric acid-modified catalysts mainly follows the E-R mechanism. The active sites on the VSS-C-S catalyst surface adsorb a large amount of NH3 species and activate them as NH2 active intermediates, which directly react with gaseous NO. Therefore, the catalyst modified with sulfuric acid after calcination has higher activity. The work provides a novel idea for reducing catalysts cost and promoting cleaner production.

Vanadium-bearing steel slag catalysts for selective catalytic reduction of NOx by NH3

Mineral-derived Catalysts Optimized for Selective Catalytic Reduction of NOx with NH3

A Novel Activated Vanadium Extraction Tailing Catalyst for NOX Removal in NH3-SCR

Influence of Calcination Temperature over Vanadium–Molybdenum Catalysts for the Selective Catalytic Reduction of NOx with NH3

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

Influence of Calcination Temperature over Vanadium–Molybdenum Catalysts for the Selective Catalytic Reduction of NO x with NH 3

Promotional Effect of Ag-doped Ag–V/TiO2 Catalyst with Low Vanadium Loadings for Selective Catalytic Reduction of NOX by NH3

Modified cold-rolled sludge as catalyst for selective catalytic reduction of NOx with NH3 at low temperatures

Characteristics of Vanadium-Based Coal Gasification Slag and the NH3-Selective Catalytic Reduction of NO

Promotional effect of Ag-doped Ag–V/TiO 2 catalyst with low vanadium loadings for selective catalytic reduction of NO X by NH 3

Study on the Removal of NOX from Sintered Flue Gas by Vanadium Sintered Ore

Nh3 Selective Catalytic Reduction of No: A Large Surface Tio2 Support and Its Promotion of V2o5 Dispersion on the Prepared Catalyst

Heteroatoms doped iron oxide-based catalyst prepared from zinc slag for efficient selective catalytic reduction of NOx with NH3

Vanadium Substitution As an Effective Way to Enhance the Redox Ability of Tungstophosphoric Acid and for Application of NH3-SCR

VxMn(4-x)Mo3Ce3/Ti catalysts for selective catalytic reduction of NO by NH3

Active Vanadium(IV) Species Synthesized at Low-Temperature Facilitate Excellent Performance in Low-Temperature NOx-Catalytic Removal

Adsorption-Induced Active Vanadium Species Facilitate Excellent Performance in Low-Temperature Catalytic NO x Abatement

Significant Catalytic Effects Induced by the Electronic Interactions Between Carboxyl and Hydroxyl Group Modified Carbon Nanotube Supports and Vanadium Species for NO Reduction with NH3 at Low Temperature

Ammonium Ion Enhanced V2O5-WO3/TiO2 Catalysts for Selective Catalytic Reduction with Ammonia

Selective catalytic reduction of NO(x)with NH(3)over TiO(2)supported metal sulfate catalysts preparedviaa sol-gel protocol

Recent Progress on Improving Low-Temperature Activity of Vanadia-Based Catalysts for the Selective Catalytic Reduction of NOx with Ammonia