Abstract:The strain after rolling plays an important role in the prediction of the microstructure and properties and plate deformation permeability. So, it is necessary to establish a more accurate theoretical strain model for the rolling process. This paper studies the modeling method of the equivalent strain based on the upper bound principle and the stream function method. The rolling deformation region is divided into three zones (inlet rigid zone, plastic zone, and outlet rigid zone) according to the kinematics. The boundary conditions of adjacent deformation zones are modified according to the characteristics of each deformation zone. A near-real kinematics admissible velocity field is established by the stream function method on this basis. The geometric boundary conditions of the deformation region are obtained. The deformation power, friction power, and velocity discontinuous power are calculated according to the redefined geometric boundary conditions. On this basis, the generalized shear strain rate intensity is calculated according to the minimum energy principle. Finally, the equivalent strain model after rolling is obtained by integrating the generalized shear strain rate in time. The plate rolling experiments of AA1060 and the numerical simulations are carried out with different rolling reductions to verify the analytic model precision of the equivalent strain. The results show that the minimum and the maximum relative equivalent strain deviation between the analytic model and the experiment is 0.52% and 9.96%, respectively. The numerical calculation and experimental results show that the model can accurately calculate the strain along the plate thickness. This model can provide an important reference for the rolling process setup and the microstructure and properties prediction.

Analysis on the Leveling Capacity of an 11-Roll Leveler in 2250 Cross Cutting Line

Evolution of Residual Stress Based on Curvature Coupling in Multi-Roll Levelling

Analysis of Design of Mandrel Pipe Mill Roll Gap Adjustment System

Design Research on Roller of New Fiber Carding Machine

Analysis of the Ship Loader's Vibration Mode in the Roll-On Process and the Reinforcement Scheme

The Finite Element Analysis on Can Coiler of Gilling Machine

A Novel Modeling Method in Metal Strip Leveling Based on a Roll-Strip Unit

Study on Leveling Process Optimization of Cold Rolled Strip

Numerical Analysis on Flatness Adjusting Performance of Hot Wide Strip Temper Mill with Small-Diameter Work Rolls

Numerical Simulation and Parameter Design of Strip Cold Rolling Process of 301L Stainless Steel in 20-Roll Mill

Finite element model for static characteristic analysis of rolling linear guide

THREE-DIMENSIONAL MODEL OF EQUIVALENT ROLL GAP OF CVC MILL UNDER CONDITIONS OF ROLL CROSSING AND NO LOAD

Optimization Design Of A Novel X-Type Six-High Rolling Mill Based On Maximum Roll System Stiffness

Research on the Mechanism and Processability of Roll Forming

Analysis and Optimization of Cvc Backup Roll Contour of A 1800mm Continuous Hot Rolling Mill

Analytical and Finite Element Analysis of the Rolling Force for the Three-Roller Cylindrical Bending Process

Design of intermediate roll contour and analysis of regulation ability on strip shape of 18-High mill

The central strain analytical modeling and analysis for the plate rolling process

Finite element analysis on crowning of roller with logarithmic profile

An Efficient Multi-Scale Modeling Method that Reveals Coupled Effects Between Surface Roughness and Roll-Stack Deformation in Cold Sheet Rolling

Theoretical Analysis of Rolling Force during Cold Rolling with Roll Crossing and Shifting System