Abstract:The engagement surface of the threaded connection of Oil Country Tubular Goods (OCTG) is a complex helical surface. The stress analysis of the threaded connection involves material nonlinearity, geometric nonlinearity and contact nonlinearity. It is difficult to obtain an analytical solution and the finite element method (FEM) is a powerful numerical method for solving the problem of threaded connection. Due to the complexity of three-dimensional modeling and the difficulty of computational convergence, researchers usually use two-dimensional axisymmetric finite element models to analyze the characteristic of threaded connection. However, twodimensional axisymmetric model can not efficiently simulate the stress characteristics of the threaded connection with make-up torque, which has greatly influence on the reliability of the connection, and it can not reflect the real stress state of the threaded connection. In this paper, an explicit dynamic FEM is employed and the nonlinear contact theory, nonlinear elastic-plastic stress-strain relationships and the von Mises yield criterion are considered to analyze the stress distribution of the threaded connection. As examples, three-dimensional elasto-plastic finite element models of bypass valve and drill pipe threaded connection are established. Mechanical characteristics of the threaded connections are analyzed, in which the make-up torque, axial loads and working torque are comparable with the real working conditions. It is found that the pin of bypass valve threaded connection shows a high stress and is broken when the working torque exceeds 22992.8 N center dot m. Meanwhile, drill pipe threaded connection is reliable under the most demanding load. Analysis results presented in this paper are consistent with the field observation.

The Finite Element Analysis on Can Coiler of Gilling Machine

Model Analysis of Gilling Machine

Load Calculation with Feature-based of Gantry Crane

Computation of Local Bearing Stress in Web of Beams Supporting Overhead Cranes

Finite Element Analysis for 40 Mn Die Forging Press

Finite Element Structural Analysis for Bearing System of Heavy-duty Gas Turbine

Static and Dynamic Analysis of a 6300 KN Cold Orbital Forging Machine

Finite Element Parametric Analysis on Bearing Capacity of Cast Steel Spherical Joint

FEA Modelling and Analysis of Die Casting Machine for Large Mg Alloy

Finite Element Analysis of Stress Distribution on Bearing Alloy

Finite element analysis on bearing performance of supporting frame for heavy boiler

Structure Analysis of Electron Gun Deflection Coil Based on ProE and ANSYS

Nonlinear Analysis for the Bearing Properties of Multiplanar Tubular Joints with Square and Circular Hollow Sections

The finite element analysis of the rear platen of injection molding machine with ANSYS software

Finite Element Analysis on Floor-type Boring and Milling Machine Tool TKS6916

THEORETICAL AND NUMERICAL ANALYSIS OF COILABLE SPACE MAST IN COILING PROCESS

Pre-stress Test for Steel Wire Wound Moving Beam of Heavy Forging Press Based on Finite Element Method

NONLINEAR FINITE ELEMENT ANALYSIS FOR THE ULTIMATE STRENGTH OF MULTIPLANNAR TUBULAR JOINT

Nonlinear Analysis of the Threaded Connection with Three-Dimensional Finite Element Model

NONLINEAR FINITE ELEMENT ANALYSIS OF END-PLATE CONNECTIONS IN STEEL FRAMES

Stiffness Analysis of Machine Tools Using Finite Element Method