Abstract:The present paper is to introduce our treating results over the influential factors and kinetics of antinomy ion by ways of flocculation and precipitation.For our research purpose,we have made analysis and discussion over the poly ferric sulphate effects on the antimonial sewage.In addition,we have also done tests of the effects of the pH value,the initial concentration,the setting time,the dosage of lime milk and temperature on the removing rate.The results of our research indicate that pH value has a significant effect on removing the antimony ions in addition to the favorable effect of the alkaline condition on the treatment.We have found that the removal rate can be made as high as 96.81% in the high pH region(pH 9.0).However,the removing rate proves to decrease with the increase of the initial concentration on the condition that the dosage of PFS and the lime milk remain unchanged.Besides,the setting time tends to have a particular effect on the removal efficiency of the antimony ions,with the prolonging of the setting time.Moreover,when the antinomy ions tend to settle down almost totally when the setting time comes up to 90 minutes.Lime is also known to be easy to accommodate to the pH value of the sewage due to its superior quality and expensive price,though too much lime may lead to over sediment,thus making the secondary processing difficult.Such a situation can be avoided by adding NaOH and HCl so as to control the pH value of sewage first,followed by adding quantificational lime to it.As for the initial concentration of sewage with the antimony ions of 5 mg/L,it would be possible to make the removal rate as high as 98.00% on the condition that the dosage of lime milk and PFS went up to 500 mg/L respectively.Though it is possible to find a slight fluctuation of the removal rate along with the changes of temperature at low initial concentrations,the removal rate tends to rise with the increase of temperature at high initial concentrations.Moreover,in the course of such applications,it is also possible to prove the influence of poly ferric sulphate on the antimonial sewage in conformity with the secondary dynamics equation.Thus,PFS has been found to be a kind of highly efficient material with low secondary contamination for disposing the antimonial sewage,which will be highly promising for future application.

Effect of Fe (III) Speciation in the Polymeric Ferric Sulfate on the Treatment Performance of Surface Water Contaminated Slightly

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Interactions of ferrate(VI) and aquatic humic substances in water treatment

[Removal of Turbidity and Effect of Humic Acid in Flocculation by Polyferric Chloride].

Effects of Fe(II)/P Ratio and Ph on Phosphorus Removal by Ferrous Salt and Approach to Mechanisms

Hydrolysis and coagulation behavior of polyferric sulfate and ferric sulfate

Effect of fulvic acid co-precipitation on biosynthesis of Fe(III) hydroxysulfate and its adsorption of lead

Arsenic Speciation by Sequential Extraction from As-Fe Precipitates Formed Under Different Coagulation Conditions

Determination of interactions of ferrihydrite-humic acid-Pb (II) system

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Preparation of poly ferric sulfate and the application in micro-polluted raw water treatment

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Mechanistic insight of weak magnetic field trigger transformation of amorphous Fe(III)-(oxy)hydroxide for enhanced ferrate (VI) towards selective removal of natural organic matter

Properties of polyferric-silicate-sulfate(PFSS) coagulant

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Exploring the influence of aquatic phosphate on Fe floc dynamics in water treatment

Coagulation of Arsenic Adsorbed Ferrihydrite with the Use of Polyaluminium Chloride (PAC) or Polyferric Sulfate (PFS)

Effects of Water Quality on Bacterial Inactivation by Ferrate(vi).

Speciation analysis and formation mechanism of iron-phosphorus compounds during chemical phosphorus removal process

Influential factors and kinetics of antinomy ion treatment by ways of flocculation and precipitation

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water