Abstract:In this study, a kind of amphoteric chitosan-based flocculants (3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CTA) modified carboxymethyl chitosan, denoted as CMC-CTA) have been prepared. The amphoteric flocculants showed notable improvement in solubility and salt-resistance in the whole pH range compared with its precursors, i.e., chitosan and cationic chitosan. The flocculation properties of CMC-CTA were systematically studied at both the laboratory and pilot scales. At laboratory scale, kaolin suspension was employed as synthetic water in the beaker experiment. The effects of pH, temperature, and original turbidity of untreated water on the dosage and flocculation performances were investigated, respectively. At pH below and above the isoelectric point of CMC-CTA, the optimal flocculation performances were obtained with a dosage of 0.03–0.20mg/L and 0.8–1.0mg/L, respectively. The flocculation mechanism was discussed in detail from the morphologies of polymeric flocculants and flocculation kinetics: The shape and charge of polymer chains in the solution greatly influenced the final flocculation performances; The flocculation kinetics agreed well with the particle collision model. Moreover, raw water from the Zhenjiang part of the Yangtze River in China was used for the further investigation of the flocculation properties at the pilot scale. The influences of dosage, sedimentation time, and mechanical mixing rate to the flocculation properties were studied by orthogonal testing. The optimal experimental condition was then obtained. Compared with the currently used flocculants in the Zhenjiang Water Factory, i.e., polyferric sulfate, which has an optimal dosage around 40mg/L, the value of CMC-CTA (1.1mg/L) decreased greatly. Above all, the flocculation experiments at the laboratory and pilot scales both indicate that the amphoteric chitosan-based flocculants have good flocculation performances in a wide pH range.

[Removal of Turbidity and Effect of Humic Acid in Flocculation by Polyferric Chloride].

Humic acid removal from water with polyaluminum coagulants: Effect of sulfate on aluminum polymerization

Preparation and Application of Slag Compound Flocculant

Role of Humic Acid in Enhancing Dissolved Air Flotation for the Removal of Tio2 Nanoparticles

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Characteristics of coagulation-flocculation of humic acid with effective performance of polymeric flocculant and inorganic coagulant

Flocculation Performance of PCFA Composite Coagulant for Removing Nanoparticles

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Removal of Terephthalic Acid in Alkalized Wastewater by Ferric Chloride

Application of Fractal Dimension on the Flocculation of Polymeric Ferric Phosphoric Sulfate

Landfill Leachate Treatment by Coagulation/flocculation Combined with Microelectrolysis-Fenton Processes

Optimization of Hydraulic Condition on Flocculation for Micro-polluted Water

Properties of polyferric-silicate-sulfate(PFSS) coagulant

Electroplating Wastewater Treatment by Polyaluminum Ferric Chloride

Insight into Control Mechanism of Polymeric Ferric Titanium Composite Coagulant on Membrane Fouling: Role of Natural Organic Matters

Removal of Tannic Acid Stabilizes CuO Nanoparticles from Aqueous Media by PAFC: Effect of Process Conditions and Water Chemistry

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

High-poly-aluminum chloride sulfate coagulants and their coagulation performances for removal of humic acid

[Coagulation performance and mechanism of Alb species in polyaluminum chloride in removing humic acid].

An enhanced coagulation using ferric chloride and poly-ferric chloride coagulant assisted by polyamidine: Performance and mechanisms

Flocculation Properties of Biodegradable Amphoteric Chitosan-Based Flocculants