Influential factors and kinetics of antinomy ion treatment by ways of flocculation and precipitation

ZHANG Yan,PANG Zhi-hua,LEI Yu-tao,WANG Zhen-xing,LIU Yong

DOI: https://doi.org/10.3969/j.issn.1009-6094.2013.03.012

2013-01-01

Abstract:The present paper is to introduce our treating results over the influential factors and kinetics of antinomy ion by ways of flocculation and precipitation.For our research purpose,we have made analysis and discussion over the poly ferric sulphate effects on the antimonial sewage.In addition,we have also done tests of the effects of the pH value,the initial concentration,the setting time,the dosage of lime milk and temperature on the removing rate.The results of our research indicate that pH value has a significant effect on removing the antimony ions in addition to the favorable effect of the alkaline condition on the treatment.We have found that the removal rate can be made as high as 96.81% in the high pH region(pH 9.0).However,the removing rate proves to decrease with the increase of the initial concentration on the condition that the dosage of PFS and the lime milk remain unchanged.Besides,the setting time tends to have a particular effect on the removal efficiency of the antimony ions,with the prolonging of the setting time.Moreover,when the antinomy ions tend to settle down almost totally when the setting time comes up to 90 minutes.Lime is also known to be easy to accommodate to the pH value of the sewage due to its superior quality and expensive price,though too much lime may lead to over sediment,thus making the secondary processing difficult.Such a situation can be avoided by adding NaOH and HCl so as to control the pH value of sewage first,followed by adding quantificational lime to it.As for the initial concentration of sewage with the antimony ions of 5 mg/L,it would be possible to make the removal rate as high as 98.00% on the condition that the dosage of lime milk and PFS went up to 500 mg/L respectively.Though it is possible to find a slight fluctuation of the removal rate along with the changes of temperature at low initial concentrations,the removal rate tends to rise with the increase of temperature at high initial concentrations.Moreover,in the course of such applications,it is also possible to prove the influence of poly ferric sulphate on the antimonial sewage in conformity with the secondary dynamics equation.Thus,PFS has been found to be a kind of highly efficient material with low secondary contamination for disposing the antimonial sewage,which will be highly promising for future application.