Abstract:High-damping rubber bearings play an essential role in isolated bridges. They can prolong the natural vibration period of a bridge and reduce its seismic response. In order to quantitatively study the isolation performance of high-damping rubber bearings, this paper investigates a concrete-filled steel tube-tied arch bridge as the research object and uses symmetrically arranged high-damping rubber bearings for isolation reconstruction. Nonlinear finite element analysis models for isolated and non-isolated bridges are built based on the structural properties of the actual bridge. Based on the structural deformation failure criterion, a bridge damage evaluation index system is established, the damage index of each component is defined, and a quantitative analysis of different damage states is carried out. Based on the incremental dynamic analysis method, the seismic vulnerability curves of bridge components and systems are established. By comparing the seismic vulnerability curves of the bridge before and after isolation, the isolation effect of the high-damping rubber bearings is quantitatively evaluated. The results of the analysis show that the high-damping rubber bearings have a significant isolation effect on the bridge structure and the effect is symmetrically distributed along the longitudinal symmetry plane of the bridge. After adopting the isolation measures, the exceedance probability of damage of each component of the bridge is reduced to varying degrees. Among them, the isolation effect on piers and arch ribs is the most significant, up to more than 90%. At the same time, the exceedance probability of damage of the bearing itself is less reduced. This result is also consistent with the original intention of the design of the isolation bearing; that is, through the energy dissipation of the isolation bearing, the seismic response of other components of the bridge is reduced.

Study on vibration reduction and base isolation of continuous bridges

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Study on the damping efficiency of continuous beam bridge with constant cross-section applied by lead rubber bearings and fluid viscous dampers

Research on earthquake-reduction design method of continuous girder bridges in a high-intensity earthquake area

Study on Seismic Isolation of Long Span Double Deck Steel Truss Continuous Girder Bridge

Seismic Vulnerability Analysis of Concrete-Filled Steel Tube Tied Arch Bridges Using Symmetrically Arranged High-Damping Rubber Bearings

Investigation of the effect of vibration-reducing tracks on the vibration and noise from a large-span steel bridge

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

A Kind of Simplified Design Approach for Girder Bridge Isolated by Triple Friction Pendulum Bearing

Vibration Characteristics of Damping Pad Floating Slab on the Long-Span Steel Truss Cable-Stayed Bridge in Urban Rail Transit

Study of Seismic Resistance Performance of Slab Bridges in High Intensity Seismic Region

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Mitigation Measures of Vortex-Induced Vibration of Suspension Bridge Based on Section Model Test

Seismic Isolation Design for Long-span Prestressed Concrete Continuous Girder Bridge

Optimal Tuning of Inerter–Spring–Damper Vehicle Suspension for Mitigation of Bridge Response

Lead-rubber-bearing with negative stiffness springs (LRB-NS) for base-isolation seismic design of resilient bridges: A theoretical feasibility study

Experimental Study on Vibration Characteristics of Unit-Plate Ballastless Track Systems Laid on Long-Span Bridges Using Full-Scale Test Rigs

Newly Constructed Subway on Over-Track Bridge Safety and Vibration Reduction Measure

Optimisation of Longitudinal Seismic Energy Dissipation System for Straddle-type Monorail-Cum-Road Long-Span Cable-Stayed Bridge

Shaking table experimental study and theoretical analysis of the longitudinal seismic-reduced behavior of continuous-beam bridges