Abstract:This paper describes a binary frequency shift keying (BFSK) transmitter architecture designed with a technique involving signal generation, mixing, and image rejection for low-power operation. The method enables the coherent generation of the two tones representing the BFSK symbols without changing the phase-locked loop (PLL) output frequency, which relaxes the settling time requirements of the PLL and thus reduces power consumption by design. The architecture allows programmable data rates and channel bandwidths according to application-specific needs. This paper includes analyses of the transmitter signal generation and building blocks. Key design equations are derived to give insights into circuit implementation details. The 480 MHz transmitter was designed and fabricated in a standard 130 nm CMOS technology, and the measurement results provide the first proof-of-concept for the feasibility of this architecture. The transmitter operates around 480 MHz with programmable data rates of 1 Mbps and 10 Mbps. It consumes $170~mu text{W}$ and $180~mu text{W}$ with the two data rates using 0.6 V and 1 V supplies for analog and digital blocks respectively. State-of-the-art figures of merit for power-efficient BFSK transmission of 170 pJ/bit and 18 pJ/bit are achieved at the data rates of 1 Mbps and 10 Mbps.

A 400MHz/900MHz Dual-Band Ultra-Low-Power Digital Transmitter for Biomedical Applications

A 11 Mw 2.4 GHz 0.18 Μm CMOS Transceivers for Wireless Sensor Networks

A 13 pJ/bit 900 MHz QPSK/16-QAM Band Shaped Transmitter Based on Injection Locking and Digital PA for Biomedical Applications

A 0.66mw 400 MHz/900 MHz Transmitter IC for In-Body Bio-Sensing Applications.

An Ultra-Low Power 400mhz OOK Transceiver for Medical Implanted Applications.

Energy Efficient Transmitters For High Data Rate Biomedical Applications

A 400mhz 3–10mbps Transceiver IC with ∼0.3 Nj/bit TX/RX Energy Efficiency for Body Area Applications

A Low-Power BFSK Transmitter Architecture for Biomedical Applications

A 90µW MICS/ISM band transmitter with 22% global efficiency

A Sub-100 $\mu$ W MICS/ISM Band Transmitter Based on Injection-Locking and Frequency Multiplication

A Sub-$100\ \mu\mathrm{w}$ RF Transmitter with 41% Global Efficiency Using Third-Harmonic Edge-Combining Technique and Class-E PA for Low-Power Biomedical Applications

A Sub-100 W RF Transmitter with 41% Global Efficiency Using Third-Harmonic Edge-Combining Technique and Class-E PA for Low-Power Biomedical Applications

A 400mhz 3-10mbps Transceiver Ic With Similar To 0.3 Nj/Bit Tx/Rx Energy Efficiency For Body Area Applications

10 Mbps 0.3 Nj/bit OQPSK Transceiver IC for 400–450 MHz Medical Telemetry

Low-power and high-efficiency transmitter based on dual-supply voltage and frequency multiplication technique

Ultra low-power transceiver with novel FSK modulation technique and efficient FSK-to-ASK demodulation

An Ultra Low-Power Dual-Band IR-UWB Transmitter in 130-nm CMOS

A 20Mbps 5.8mw QPSK transmitter based on injection locking and Class-E PA for wireless biomedical applications

Low-Power, High-Data Rate 915 MHz Transceiver with Fully Passive Wake-Up Receiver for Biomedical Implants

A 2.4ghz Low Power Wireless Transceiver Analog Front-End for Endoscopy Capsule System