Abstract:Although manufactured sand is becoming increasingly popular to prepare the cleaner and sustainable construction production in face of the depletion of natural river sand, it needs to be further promoted in some advanced concretes like ultra-high performance concrete (UHPC). Different lithological manufactured sands with the same particle gradation were used as fine aggregates to prepare UHPC in this study. Meanwhile, the UHPC mixtures prepared with washed or unwashed sands were also compared. The following aspects were evaluated: flowability, rheology, setting time, mechanical strength, volume stability, thermogravimetric behavior, pore distribution, microstructure characteristics, environmental and economical benefits. Results indicated that sand washing process greatly lowered the apparent viscosity and yield stress, and improved the flowability of UHPC. Increments of 16.7 %, 19.6 % and 15.7 % in flowability were observed for washed granite, tuff and limestone sand UHPC. Pre-washing process significantly delayed the setting times. Tuff sand UHPC demonstrated the optimal mechanical properties (compressive, flexural and tensile strengths), with a compressive strength exceeding 150 MPa at 28 days. In most cases, sand washing process had a slightly beneficial effect on mechanical strengths. The use of washed sand reduced the autogenous shrinkage of UHPC by 5.1%-10.6 %. Tuff sand UHPC possessed the largest cumulative pore volume, while limestone one had the fewest macropores (>100 nm). The cumulative pore volume and total porosity decreased with the addition of washed sands. Compared with traditional UHPC, the utilization of manufactured sand with different lithology and pre-washing process in UHPC could not only illustrate good workability and mechanical strengths, it also demonstrated lower carbon emissions and production costs. The prepared eco-friendly UHPC in this study effectively utilized the solid waste and lessened the environmental burden, which proposed an emerging approach for the application of manufactured sands in green advanced concretes in future work.

DURABILITY AT OTHER ONE: UTILIZATION OF DESERT SAND AND SEA SAND FOR SUSTAINABLE DEVELOPMENT OF CONCRETE

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Utilization of Solid Waste from Tunnel Excavation As Manufactured Sand with Different Lithology and Pre-Washing Process for Preparation of Eco-Friendly Ultra-High Performance Concretes: Properties and Microstructural Analysis

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

Analysis of durability for sea dam foundation

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Experimental study on strength and abrasion-resistance enhancement admixture

Feasibility and Application of Concrete Containing Chloride-rich Offshore Sand

Research on the performance of seawater sea-sand concrete: A review

Developing green and economical low-alkalinity seawater sea sand concrete via innovative processing underground sediment

Optimal Design and Performance of Concrete with Function Component in Marine Environment

Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete

Experimental Study on the Strength and Durability of Manufactured Sand HPC in the Dalian Bay Undersea Immersed Tube Tunnel and Its Engineering Application

Feasibility of using Waste Brine/Seawater and Sea Sand for the Production of Concrete: An Experimental Investigation from Mechanical Properties and Durability Perspectives

Durability of MICP-reinforced Calcareous Sand in Marine Environments: Laboratory and Field Experimental Study

High ductility cementitious composites incorporating seawater and coral sand (SCS-HDCC) for offshore engineering: Microstructure, mechanical performance and sustainability

Developing a Sustainable Ultrahigh-Performance Concrete Using Seawater and Sea Sand in Combination with Superfine Stainless Wires

Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete

Mechanical properties and acoustic emission analysis of desert sand concrete reinforced with steel fiber

Sustainable ultra-high performance concrete with incorporating mineral admixtures: Workability, mechanical property and durability under freeze-thaw cycles

Utilizing Fine Marine Sediment as a Partial Substitute for Sand in Self-Compacting Concrete Specially Designed for Application in Marine Environments