Abstract:It is proposed to use dredged marine sediments as fill material in marine reclamation engineering by stabilisation/solidification (S/S) technology with sustainable binding materials, which can help the soft soil gain strength to solve the engineering geological problem of its insufficient bearing capacity. In this work, lime and two types of industrial wastes, i.e., incinerated sewage sludge ash (ISSA) and ground granulated blast-furnace slag (GGBS), were selected as the binding materials. Hong Kong marine deposits (HKMD) slurry with a high initial water content of 110% was mixed with 30% binders (30% lime and 70% (ISSA+GGBS) with ISSA: GGBS = 3). The seawater (SW) with salinity of 3.6% was employed as mixing solution in S/S treatment of HKMD. To detect the effect of each main composition in SW on the performance of S/S HKMD, the pure solutions of NaCl, MgCl 2 and Na 2 SO 4 were adopted in this study. The results show that the use of SW in the lime-activated ISSA and GGBS treated dredged HKMD slurry is effective in improving its strength. The X-ray diffraction, thermo-gravimetric analysis and scanning electron microscopy observations present the formation of calcium/magnesium silicate hydrate (C/M-S-H), Friedel's salt and ettringite, which fill into the pores and interlock the particles in the mixture increasing the strength of the treated HKMD. The chemical compositions of SW have significant and different impacts on the performance of treated HKMD samples. Na + can help the samples gain higher strength and result in the cracking development in the S/S samples. Mg 2+ will lead to the formation of M-S-H, which reduces the porosity of treated HKMD samples. However, the contribution of M-S-H to the soil strength is less than that of C-S-H. Cl − in the mixture would slow down the reaction speed and show slight impacts on the modulus. SO 4 2− accelerates the reactions in the treated samples and has a more significant effect on nano-size porosity of bulk sample. Consequently, the seawater has positive effect on the S/S performance of HKMD slurry, suggesting potential application in the practical projects.

Developing green and economical low-alkalinity seawater sea sand concrete via innovative processing underground sediment

A Megaton-Scale Industrial Demonstration Study on Hydrothermal Mineralization Enabled Silty Waste Upcycling

Utilization of Solid Waste from Tunnel Excavation As Manufactured Sand with Different Lithology and Pre-Washing Process for Preparation of Eco-Friendly Ultra-High Performance Concretes: Properties and Microstructural Analysis

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Investigation on the Optimal Formulation and Mechanism of Marine Organic Silt Improved with Magnesium-Cement-based Stabilizer

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

A Substitute for Portland Cement: Experiments on Ecofriendly Reinforcement of Large-Scale Calcareous Sand by Microbial-Induced Carbonate Precipitation Spraying Method

Recent Advances in Alkali-Activated Materials with Seawater and Sea Sand

Utilizing Fine Marine Sediment as a Partial Substitute for Sand in Self-Compacting Concrete Specially Designed for Application in Marine Environments

Research on Sustainable Development of Fine-Grained Material Cement Slurry

Performance Evaluation and Mechanism Study of Solid Waste-Based Cementitious Materials for Solidifying Marine Soft Soil under Seawater Mixing and Erosion Action

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Feasibility of using Waste Brine/Seawater and Sea Sand for the Production of Concrete: An Experimental Investigation from Mechanical Properties and Durability Perspectives

Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete

Development of admixtures on seawater sea sand concrete: A critical review on Concrete hardening, chloride ion penetration and steel corrosion

Research on the performance of seawater sea-sand concrete: A review

Development of sustainable concrete incorporating seawater: A critical review on cement hydration, microstructure and mechanical strength

Recycling Dredged Sediment into Fill Materials, Partition Blocks, and Paving Blocks: Technical and Economic Assessment

Effect of seawater on solidification/stabilisation treatment of marine soft soil slurry by lime-activated ISSA and GGBS

Green remediation of contaminated sediment by stabilization/solidification with industrial by-products and CO2 utilization

Developing a Sustainable Ultrahigh-Performance Concrete Using Seawater and Sea Sand in Combination with Superfine Stainless Wires