Abstract:Today’s anode for lithium ion batteries is dominated by graphite, with a low operate voltage at 0.1 V vs. Li+/Li, easy to format lithium dendrite and cause to safety risk. As an alternative anode material, the “zero-strain” spinel structure Li4Ti5O12 could avoid Li plating with a relative high intercalation potential (1.55 V vs. Li+/Li) and exhibits an excellent cycling stability. However, the slightly low capacity and high voltage of Li4Ti5O12 result in low energy density. Therefore, it is very important, but nevertheless a challenge, to develop a negative electrode material with a large capacity and an intercalation potential below 1 V, but not close to the Li plating potential, to ensure the safety of batteries. Herein, we report a new anode material of Li2TiSiO5 as anode material for LIBs. The electrochemical profile, structure and Li storage mechanism were extensively studied. The crystal structure of Li2TiSiO5 is illustrated as a layered structure with infinite sheets of distorted TiO6 octahedra and SiO4 tetrahedra, linked by Li atoms. The distorted TiO6 octahedral and SiO4 tetrahedral networks are thought to be the origin of the structural stability of this material. The crystal structure is depicted in Fig. 1b (left) and the details are summarized in Table 1. Along with the refined structure of Li2TiSiO5, the nuclear-density difference (Fourier) map in Fig. 1b (middle) reveals negative nuclear density only at the 4d, 4e, and Ti (2c) sites, implying that lithium can only reside at these sites. The 4e sites are indicated by the yellow balls in Fig. 1b (right). Figure 2 give the typical charge/discharge curve of Li 2TiSiO5 at between 0 and 3 V (vs. Li+/Li), delivers a reversible charge capacity (Li-ion extraction) of 308 mAh/g, with a voltage plateau below 1.0 V. Fig. 1 (a) Crystal structure characterization of Li2TiSiO5 and (b) typical charge/discharge curve of Li2TiSiO5 Figure 1

Conductive Li3.08Cr0.02Si0.09V0.9O4 Anode Material: Novel “zero‐strain” Characteristic and Superior Electrochemical Li+ Storage

"Zero-Strain" Li2VSiO5 for High-Performance Lithium Storage

The Lithium Storage Mechanism of Zero-Strain Anode Materials with Ultralong Cycle Lives

Zero‐Strain High‐Capacity Silicon/Carbon Anode Enabled by a MOF‐Derived Space‐Confined Single‐Atom Catalytic Strategy for Lithium‐Ion Batteries

A Stable CaV 4 O 9 Anode Promises Near‐Zero Volume Change and High‐Capacity Lithium Storage

Si Single‐Atom Sites Anchored Carbon Anode Achieving the Zero‐Strain Feature and Superior Li+ Storage Performance

A New Sodium Calcium Cyclotetravanadate Framework: “Zero‐Strain” during Large‐Capacity Lithium Intercalation

2D TaSe2 as a Zero-Strain and High-Performance Anode Material for Li+ Storage

Li2TiSiO5: a low potential and large capacity Ti-based anode material for Li-ion batteries

“Zero-strain” K2SrV4O12 as a high-temperature friendly Li+-storage material

Absolutely‐Zero‐Expansion Behavior Enables Ultra‐Long Life for Stationary Energy Storage

Crystal Engineering of Silica Anode Achieving Intrinsic Zero‐Strain

“Quasi-Zero-strain” TiO2–x As an Ultra-Long-Life Anode for Li-Ion Batteries

“Quasi-Zero-Strain” TiO 2– x as an Ultra-Long-Life Anode for Li-Ion Batteries

MgV3O8 Anode Exhibiting Enhanced Rate Capability and Stability for Lithium Storage Applications

Zero-Strain Sodium Lanthanum Titanate Perovskite Embedded in Flexible Carbon Fibers as a Long-Span Anode for Lithium-Ion Batteries

Li Storage in a Low Intercalation Potential Li 2 TiSiO 5

Zero-strain Ca<sub>0.4</sub>Ce<sub>0.6</sub>VO<sub>4</sub> anode material for high capacity and long-life Na-ion batteries

3D Carbon Coating Enabled High‐capacity and Stable Micro‐sized Silicon Suboxide‐graphite Blended Anodes for Practical Lithium‐ion Batteries

Polyanion-Type Anode Material for Lithium-Ion Batteries

An Anode Material for Lithium Storage: Si@N,S-Doped Carbon Synthesized via In Situ Self-Polymerization