Abstract:Today’s anode for lithium ion batteries is dominated by graphite, with a low operate voltage at 0.1 V vs. Li+/Li, easy to format lithium dendrite and cause to safety risk. As an alternative anode material, the “zero-strain” spinel structure Li4Ti5O12 could avoid Li plating with a relative high intercalation potential (1.55 V vs. Li+/Li) and exhibits an excellent cycling stability. However, the slightly low capacity and high voltage of Li4Ti5O12 result in low energy density. Therefore, it is very important, but nevertheless a challenge, to develop a negative electrode material with a large capacity and an intercalation potential below 1 V, but not close to the Li plating potential, to ensure the safety of batteries. Herein, we report a new anode material of Li2TiSiO5 as anode material for LIBs. The electrochemical profile, structure and Li storage mechanism were extensively studied. The crystal structure of Li2TiSiO5 is illustrated as a layered structure with infinite sheets of distorted TiO6 octahedra and SiO4 tetrahedra, linked by Li atoms. The distorted TiO6 octahedral and SiO4 tetrahedral networks are thought to be the origin of the structural stability of this material. The crystal structure is depicted in Fig. 1b (left) and the details are summarized in Table 1. Along with the refined structure of Li2TiSiO5, the nuclear-density difference (Fourier) map in Fig. 1b (middle) reveals negative nuclear density only at the 4d, 4e, and Ti (2c) sites, implying that lithium can only reside at these sites. The 4e sites are indicated by the yellow balls in Fig. 1b (right). Figure 2 give the typical charge/discharge curve of Li 2TiSiO5 at between 0 and 3 V (vs. Li+/Li), delivers a reversible charge capacity (Li-ion extraction) of 308 mAh/g, with a voltage plateau below 1.0 V. Fig. 1 (a) Crystal structure characterization of Li2TiSiO5 and (b) typical charge/discharge curve of Li2TiSiO5 Figure 1

“Quasi-Zero-Strain” TiO 2– x as an Ultra-Long-Life Anode for Li-Ion Batteries

“Quasi-Zero-strain” TiO2–x As an Ultra-Long-Life Anode for Li-Ion Batteries

Constructing Porous TiO2 Crystals by an Etching Process for Long-Life Lithium Ion Batteries.

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Li2TiSiO5: a low potential and large capacity Ti-based anode material for Li-ion batteries

KxNayH(2‐x‐y)Ti2O5 for High‐Performance Lithium‐Ion Battery Anode with Li Dendrites‐Free Mechanism, Zero‐Strain Characteristic

Zero-Strain Sodium Lanthanum Titanate Perovskite Embedded in Flexible Carbon Fibers as a Long-Span Anode for Lithium-Ion Batteries

Crystal structure regulation of trititanium pentoxide for advanced zero-strain lithium storage anode

The Lithium Storage Mechanism of Zero-Strain Anode Materials with Ultralong Cycle Lives

Li Storage in a Low Intercalation Potential Li 2 TiSiO 5

Polyanion-Type Anode Material for Lithium-Ion Batteries

2D TaSe2 as a Zero-Strain and High-Performance Anode Material for Li+ Storage

Zero‐Strain High‐Capacity Silicon/Carbon Anode Enabled by a MOF‐Derived Space‐Confined Single‐Atom Catalytic Strategy for Lithium‐Ion Batteries

"Zero-Strain" Li2VSiO5 for High-Performance Lithium Storage

Absolutely‐Zero‐Expansion Behavior Enables Ultra‐Long Life for Stationary Energy Storage

Facile Synthesis of Pre-Lithiated LiTiO<sub>2</sub> Nanoparticles for Quick Charge and Long Lifespan Anode in Lithium-Ion Batteries

Fabrication of hollow TiO2 nanospheres for high-capacity and long-life lithium storage

Cation-deficient Perovskite Li0.35Nd0.55TiO3 As a High-Performance Anode for Lithium-Ion Batteries

Controlling precise voids in the ion-selective carbon shell for zero-strain electrode

Oxygen Vacancy-Modulated Zeolitic Li4ti5o12 Microsphere Anode for Superior Lithium-Ion Battery

SiO@C/TiO2 nanospheres with dual stabilized architecture as anode material for high-performance Li-ion battery