Abstract:The most popular anode material in commercial Li-ion batteries is still graphite. However, its low intercalation potential is close to that of lithium, which results in the dendritic growth of lithium at its surface, and the formation of a passivation film that limits the rate capability and may result in safety hazards. High-performance anodes are thus needed. In this context, lithium titanite oxide (LTO) has attracted attention as this anode material has important advantages. Due to its higher lithium intercalation potential (1.55 V vs. Li+/Li), the dendritic deposition of lithium is avoided, and the safety is increased. In addition, LTO is a zero-strain material, as the volume change upon lithiation-delithiation is negligible, which increases the cycle life of the battery. Finally, the diffusion coefficient of Li+ in LTO (2 × 10−8 cm2 s−1) is larger than in graphite, which, added to the fact that the dendritic effect is avoided, increases importantly the rate capability. The LTO anode has two drawbacks. The energy density of the cells equipped with LTO anode is lower compared with the same cells with graphite anode, because the capacity of LTO is limited to 175 mAh g−1, and because of the higher redox potential. The main drawback, however, is the low electrical conductivity (10−13 S cm−1) and ionic conductivity (10−13–10−9 cm2 s−1). Different strategies have been used to address this drawback: nano-structuration of LTO to reduce the path of Li+ ions and electrons inside LTO, ion doping, and incorporation of conductive nanomaterials. The synthesis of LTO with the appropriate structure and the optimized doping and the synthesis of composites incorporating conductive materials is thus the key to achieving high-rate capability. That is why a variety of synthesis recipes have been published on the LTO-based anodes. The progress in the synthesis of LTO-based anodes in recent years is such that LTO is now considered a substitute for graphite in lithium-ion batteries for many applications, including electric cars and energy storage to solve intermittence problems of wind mills and photovoltaic plants. In this review, we examine the different techniques performed to fabricate LTO nanostructures. Details of the synthesis recipes and their relation to electrochemical performance are reported, allowing the extraction of the most powerful synthesis processes in relation to the recent experimental results.

Zero-Strain Sodium Lanthanum Titanate Perovskite Embedded in Flexible Carbon Fibers as a Long-Span Anode for Lithium-Ion Batteries

“Quasi-Zero-Strain” TiO 2– x as an Ultra-Long-Life Anode for Li-Ion Batteries

Cation-deficient Perovskite Li0.35Nd0.55TiO3 As a High-Performance Anode for Lithium-Ion Batteries

The Lithium Storage Mechanism of Zero-Strain Anode Materials with Ultralong Cycle Lives

Anatase TiO 2 ultrathin nanobelts derived from room-temperature-synthesized titanates for fast and safe lithium storage

Zero‐Strain High‐Capacity Silicon/Carbon Anode Enabled by a MOF‐Derived Space‐Confined Single‐Atom Catalytic Strategy for Lithium‐Ion Batteries

Fabrication of Li4Ti5O12 (LTO) as Anode Material for Li-Ion Batteries

Lithium lanthanum titanate perovskite as an anode for lithium ion batteries

Low-Temperature Synthesis of Lithium Lanthanum Titanate/Carbon Nanowires for Fast-Charging Li-Ion Batteries

Li2TiSiO5: a low potential and large capacity Ti-based anode material for Li-ion batteries

PVA-assisted spray deposited porous Li4Ti5O12 thin film as high-rate and long-cycle anode for lithium-ion thin-film batteries

A Low Strain A‐Site Deficient Perovskite Lithium Lanthanum Niobate Anode for Superior Li + Storage

KxNayH(2‐x‐y)Ti2O5 for High‐Performance Lithium‐Ion Battery Anode with Li Dendrites‐Free Mechanism, Zero‐Strain Characteristic

Self-Supporting and Binder-Free Anode Film Composed of Beaded Stream-Like Li4ti5o12 Nanoparticles for High-Performance Lithium-Ion Batteries

Oxygen Vacancy-Modulated Zeolitic Li4ti5o12 Microsphere Anode for Superior Lithium-Ion Battery

Li4Ti5O12 Spinel Anode: Fundamentals and Advances in Rechargeable Batteries

Two-dimensional wavelike spinel lithium titanate for fast lithium storage

Self-supported Li4Ti5O12 Nanosheet Arrays for Lithium Ion Batteries with Excellent Rate Capability and Ultralong Cycle Life

Ti 3+ Self-Doped Li 4 Ti 5 O 12 Anchored on N-Doped Carbon Nanofiber Arrays for Ultrafast Lithium-Ion Storage.

Capacity Fade Mechanism of Li4Ti5O12 Nanosheet Anode

Implanting ultrafine tin oxide nanocrystals on hollow and porous carbon nanorods towards superior lithium storage