Abstract:Surface acoustic wave (SAW) devices have been widely explored for real-time monitoring of toxic and irritant chemical gases such as nitrogen oxide (NO2), but they often have issues such as a complicated process of the sensing layer, low sensitivity, long response time, irreversibility, and/or requirement of high temperatures to enhance sensitivity. Herein, we report a sensing material design for room-temperature NO2 detection based on a 3D porous architecture of Ag-decorated reduced graphene oxide-polypyrrole hybrid aerogels (rGO-PPy/Ag) and apply UV activation as an effective strategy to further enhance the NO2 sensing performance. The rGO-PPy/Ag-based SAW sensor with the UV activation exhibits high sensitivity (127.68 Hz/ppm), fast response/recovery time (36.7 s/58.5 s), excellent reproducibility and selectivity, and fast recoverability. Its enhancement mechanisms for highly sensitive and selective detection of NO2 are based on a 3D porous architecture, Ag-decorated rGO-PPy, p-p heterojunction in rGO-PPy/Ag, and UV photogenerated carriers generated in the sensing layer. The scientific findings of this work will provide the guidance for future exploration of next-generation acoustic-wave-based gas sensors.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13309.Synthesis process of 3D stacked porous architecture rGO-PPy/Ag, fabrication process of the SAW NO2 sensors, cross-sectional SEM image and EDS elemental mapping of rGO-PPy/Ag sensing film; high magnification TEM images of Ag NPs; size distribution of the Ag NPs, high magnification SEM images of the sensing film; AFM images of the sensing film; XRD patterns of rGO-PPy/Ag compared with PDF standard card, Raman intensity data, XPS elemental analysis, FTIR spectrum, calculation method for the limit of detection (LOD), long-term stability tests; the temperature changes of sensing film, and I–V curve of sensing film (PDF)This article has not yet been cited by other publications.

A Novel Three-Dimensional Ag Nanoparticles/reduced Graphene Oxide Microtubular Field Effect Transistor Sensor for NO2 Detections

A novel three-dimensional Ag nanoparticles/reduced graphene oxide microtubular field effect transistor sensor for NO2 detections.

A High Response Three-Dimensional Ag Nanoparticles/Rgo Microtubular Field Effect Transistor Sensor For No2 Detections

A High Response Three-Dimensional Ag Nanoparticles/Rgo Microtubular Field Effect Transistor Sensor for No<inf>2</inf> Detections

Ag-Modified 3D Reduced Graphene Oxide Aerogel-Based Sensor with an Embedded Microheater for a Fast Response and High-Sensitive Detection of NO2.

Conducting Polymer-Bridged Three-Dimensional Heterojunctions of Reduced Graphene Oxide/γ-Fe2o3 Hybrids for High-Performance NO2 Gas Sensing

Three-Dimensional Fe3O4@Reduced Graphene Oxide Heterojunctions for High-Performance Room-Temperature NO2 Sensors

Ultrasensitive flexible NO2 gas sensors via multilayer porous polymer film

Real-Time Monitoring of Nitric Oxide at Single-Cell Level with Porphyrin-Functionalized Graphene Field-Effect Transistor Biosensor.

Real-Time Monitoring of Nitric Oxide at Single-Cell Level with Porphyrin-Functionalized Graphene Field-Effect Transistor Biosensor

In-situ sulfidation-derived three-dimensional cobalt sulfide nanoflower/graphene nanosheet hybrid for ultrasensitive room-temperature NO2 gas sensor

Sprayed, Scalable, Wearable, and Portable NO2 Sensor Array Using Fully Flexible AgNPs-All-Carbon Nanostructures.

Three-Dimensional-Structured Boron- and Nitrogen-Doped Graphene Hydrogel Enabling High-Sensitivity NO2 Detection at Room Temperature

Engineering SnO2 Nanorods/ethylenediamine-Modified Graphene Heterojunctions with Selective Adsorption and Electronic Structure Modulation for Ultrasensitive Room-Temperature NO2 Detection.

In Situ Polymerization Deposition of Porous Conducting Polymer on Reduced Graphene Oxide for Gas Sensor.

Three-Dimensional MoS2/Reduced Graphene Oxide Nanosheets/Graphene Quantum Dots Hybrids for High-Performance Room-Temperature NO2 Gas Sensors

High Performance Acoustic Wave Nitrogen Dioxide Sensor with Ultraviolet Activated 3D Porous Architecture of Ag-Decorated Reduced Graphene Oxide and Polypyrrole Aerogel

Enabling Quick Response to Nitrogen Dioxide at Room Temperature and Limit of Detection to Ppb Level by Heavily n-Doped Graphene Hybrid Transistor

Au-decorated Porous Structure Graphene with Enhanced Sensing Performance for Low-Concentration NO 2 Detection

Engineering SnO 2 nanorods/ethylenediamine-modified graphene heterojunctions with selective adsorption and electronic structure modulation for ultrasensitive room-temperature NO 2 detection

Interface engineering of a highly sensitive porous CuO modified rGO layers for room temperature NO 2 gas sensor