Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Rolling element bearings are the most important components in almost all rotating machines. These bearings are often subjected to repetitive load cycles at different operating conditions. Excessive loads, speeds, and improper operating conditions lead to the propagation of defects on their load-bearing surfaces, thereby causing a negative impact on the performance of rotating machines. This paper presents the results of experimental investigations to assess wear propagation in roller bearings using lubricant degradation, vibration, and statistical parameter analysis methods. A roller bearing setup was developed in the laboratory, and the test bearing (NJ 307E) was subjected to fatigue tests over a period of 900 h. The bearing was operated at a speed and radial load of 800 rpm and 1 kN, respectively. The film thickness analysis revealed a transition in lubrication regimes during 600–900 h of operation. Grease structure degradation and oxidation analyses were carried out using scanning electron microscope images and the Fourier transform infrared radiation technique. Further, the vibration signals are extracted from the bearing housing at regular intervals. Using the fast Fourier transform technique, these vibration signals were used to analyze bearing fault frequencies to highlight the faults developed on bearing contact surfaces. The statistical features of vibration signals such as root mean square, kurtosis, and crest factor were used to assess the severity of wear propagated on the bearing contact surfaces. Integrating tribological and vibration parameter analysis techniques provided a reliable assessment of surface fatigue wear propagated on the roller-bearing contact surfaces.

An investigation of contact characteristics of a roller bearing with a subsurface crack

Subsurface propagation of partial ring cracks under rolling contactPart II. Fracture mechanics analysis

Identification of Subsurface Mesoscale Crack in Full Ceramic Ball Bearings Based on Strain Energy Theory

Subsurface propagation of partial ring cracks under rolling contact: Part I. Experimental studies

A fault diagnosis method based on stiffness evaluation model for full ceramic ball bearings containing subsurface cracks

Simulation and Experimental Study on Crack Propagation in Slewing Bearing Steel

Experimental Study on the Skidding Damage of a Cylindrical Roller Bearing

On the Formation and Damage Mechanism of Rolling Contact Fatigue Surface Cracks of Wheel/rail under the Dry Condition

Vertical short-crack behavior and its application in rolling contact fatigue

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Research of Singular Value Decomposition Based on Slip Matrix for Rolling Bearing Fault Diagnosis

Partial slip contact of materials with vertically aligned cracks near surface

Numerical analysis of rolling contact fatigue crack initiation Considering material microstructure

Characterization of Bond Fracture in Discrete Groove Wear of Cageless Ball Bearings

Asperity interaction induced vibration excitation of cylindrical roller bearings with localized defect

Fatigue crack growth in wheel-rail rolling-sliding contact: A perspective of elastic-plastic fracture mechanics criterion

The effect of friction on surface crack initiation in rolling contact fatigue considering damage accumulation

Experimental investigations to assess surface fatigue failure in rolling contact bearing

A Coupled 3d Morphological Reconstruction Approach for Surface Microcrack in Si3n4 Ceramic Bearing Roller Based on Adaptive Nano Feature Extraction & Multiscale Depth Fusion

Influence of curvature radius on the axial crack signal of the magnetic flux leakage detection for tapered roller bearing rings

A peridynamic study on the effects of surface topography on rolling contact fatigue